Sharp DX-C310 DX-C310 DX-C3400 Operation Manual - Page 582
Image Send Settings
View all Sharp DX-C310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 582 highlights
SYSTEM SETTINGS OPERATION PANEL (ADMINISTRATOR) Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Select the [Image Send Settings] key to configure the settings. For explanations of settings related to the fax function, see "FAX SYSTEM SETTINGS ON THE OPERATION PANEL" (page 6-97). Operation Settings The operation settings below apply to all image send functions. Other Settings Default Display Settings You can select one of 5 base screen types for the base screen that appears when the [IMAGE SEND] key is pressed or when the [CLEAR ALL] ( ) key is pressed in image send mode. • Address Book • Scan • Internet Fax • Fax • Data Entry Hold settings for a while after scanning has been completed Use this setting to hold the settings after scanning is completed (until Auto Clear Mode activates). Switch Automatically to Copy Mode Screen Enable this setting to have the screen automatically switch to the copy mode screen if no action is taken in the image send mode screen for 20 seconds. Address Book Default Selection One of the following screens can be specified for the initial address book screen. Tab Switch • ABC • Group Address Type • All • E-mail • FTP/Desktop • Network Folder • Internet Fax (Including Direct SMTP) • Fax • Group Initial Resolution Setting The following settings are available for the default resolutions of scan, Internet fax, and fax mode. Scan : 100X100 dpi, 200X200 dpi, 300X300 dpi, 400X400 dpi, 600X600 dpi Internet fax : 200X100 dpi 200X200 dpi 200X400 dpi 400X400 dpi Half Tone 600X600 dpi Fax: Standard Fine Super Fine Half Tone Ultra Fine Default Exposure Settings This is used to set the default exposure settings for scanning a document in image send mode. Select [Auto] or [Manual]. When [Manual] is selected, the exposure can be set to one of 5 levels. Default Original Image Type Select the original type beforehand to enable transmission at a resolution suitable for the original (only in scan mode and USB memory mode). The settings are shown below. • Text/Printed Photo • Text/Photo • Text • Photo • Printed Photo • Map • When the exposure is set to [Auto], a default original type cannot be selected. Moiré Reduction This reduces the moiré effect (line pattern) that occurs when printed matter is scanned (only in scan mode and USB memory mode). 6-34 Contents