Sharp DX-C310 DX-C310 DX-C3400 Operation Manual - Page 323
Placement Orientation Of The Original, When The Line Is Busy, When A Communication Error Occurs
View all Sharp DX-C310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
FACSIMILE PLACEMENT ORIENTATION OF THE ORIGINAL A 5-1/2" x 8-1/2" (A5) or B5 size original in landscape orientation will be rotated 90 degrees and transmitted as a 5-1/2" x 8-1/2" (A5) or B5 image in portrait orientation. Transmission 5-1/2" x 8-1/2" (A5) size original Rotated to 5-1/2" x 8-1/2" (A5) image in portrait orientation 5-1/2" x 8-1/2" (A5) image in portrait orientation is transmitted. System Settings (Administrator): Rotation Sending Setting The factory default setting is rotate before transmission. If this setting is disabled, the original will be transmitted in the orientation in which it is placed. WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be canceled. Wait briefly and then try sending the fax again. To cancel transmission... Cancel the transmission from the job status screen. ☞ CANCELING A FAX IN PROGRESS OR A RESERVED FAX (page 4-126) System Settings (Administrator): Recall in Case of Line Busy This is used to set the number of recall attempts and the interval between attempts when the connection cannot be established because the line is busy. The factory default setting is 2 attempts at an interval of 3 minutes. WHEN A COMMUNICATION ERROR OCCURS If a communication error occurs or the other fax machine does not answer the call within a preset period of time, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. To cancel transmission... Cancel the transmission from the job status screen. ☞ CANCELING A FAX IN PROGRESS OR A RESERVED FAX (page 4-126) System Settings (Administrator): Recall in Case of Communication Error This is used to set the number of recall attempts and the interval between attempts when a transmission fails due to an error. The factory default setting is attempt at an interval of 3 minutes. 4-30 Contents