Sharp FO-DC550 FO-DC550 Operation Manual - Facsimile Operations - Page 11

Menu item Settings (factory default setting appears in bold) 6 : AUTO LISTING Enable automatic printing of the Activity Report when information on a total of 50 fax transmissions/receptions accumulates. 1 : ON 2 : OFF 7 : PRINT SELECTION 1 : TRANSMISSION Select the condition for printing reports on fax transmissions. 1 : ALWAYS PRINTS 2 : ERROR ONLY 3 : NEVER PRINTS 2 : BROADCAST Select the condition for printing reports on broadcast transmissions. 1 : ALWAYS PRINTS 2 : ERROR ONLY 3 : NEVER PRINTS 3 : RECEPTION Select the condition for printing reports on received faxes. 1 : ALWAYS PRINTS 2 : ERROR ONLY 3 : NEVER PRINTS 4 : IMAGE MEM. PRINT Enable printing of the original image on transaction reports. 1 : ALWAYS PRINTS 2 : ERROR ONLY 3 : NEVER PRINTS 8 : RECALL TIMES BUSY Set the number of recall attempts that are made when the line is busy. 00 - 14 (02) 9 : RECALL TIMES ERR Set the number of recall attempts that are made when a communication error occurs. 0 - 1 (1) 10 : RECALL INT. BUSY Set the interval between recall attempts when the line is busy. 1 to 15 minutes can be selected. 01 - 15 min. (03 min.) 11 : RECALL INT. ERR Set the interval between recall attempts when a communication error occurs. 0 to 15 minutes can be selected. 00 - 15 min. (01 min.) 12 : SECURITY SELECT Enable the polling security function. 1 : ON 2 : OFF 13 : FAX REMOTE NUMBER Set the 1-digit number used to activate remote fax reception. 0 - 9 (5) 14 : REMOTE RECEPTION Enable the remote reception function. 1 : ON 2 : OFF 15 : FAX SIGNAL RCV Enable automatic fax reception when a fax tone is heard after answering a call on an extension phone. 1 : ON 2 : OFF Page 88 89 89 89 89 32 33 34 35 77 40 39 38 7