Sharp FO-DC550 FO-DC550 Operation Manual - Facsimile Operations - Page 63

DIALING AND TRANSMITTING Once you have set the original (either in the RSPF or on the document glass), and have selected the desired transmission settings, you are ready to dial the number of the receiving fax machine and transmit the original. You can choose from one of the several ways of dialing that best suit your needs. DIRECT KEYPAD DIALING If the number of the fax you want to reach is not a Rapid key or Speed Dial number, use Direct Keypad Dialing to manually enter it using the following procedure: 1 Confirm that you have correctly set the original in the RSPF or on the document glass. (See "SETTING THE ORIGINAL" (p.52)) 3 Check the display. If the number of the receiving machine is shown correctly, press the [START] key ( ). 2 Enter the number of the fax machine you want to send to by pressing the numeric keys. If it is not correct, press the [CLEAR] key ( ) to backspace and clear one digit at a time, and then enter the correct number. 4 RAPID KEY DIALING If the number you want to dial has been stored as a Rapid key number (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)), you can dial it by pressing the appropriate Rapid key as shown: 01 02 10 11 06 07 15 16 03 04 12 13 08 09 17 18 05 14 SHIFT SPEED DIALING If the number you want to dial has been stored as a Speed Dial number, you can dial it using the following procedure: 1 Press the [SPEED/SEARCH] key and then enter the two-digit number by pressing the numeric keys (See "STORING NUMBERS FOR AUTOMATIC DIALING" (p.42)). SPEED/ BROAD- RECEPTION REDIAL/ MEMORY SEARCH CAST MODE PAUSE RESOLU- COVER 2-SIDE TION CONTRAST SHEET LIST TX If it is not correct, press the [CLEAR] key ( ) to backspace and clear two digit at a time, and then LINE STATUS SPEAKER enter the correct number. 2 Press the [START] key ( ) and check the name or number that appears in the display. 59