Sharp FO-DC550 FO-DC550 Operation Manual - Facsimile Operations - Page 20
About The Liquid Crystal Display, Using The Arrow Keys
View all Sharp FO-DC550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ABOUT THE LIQUID CRYSTAL DISPLAY The machine is equipped with a two-line liquid crystal display (LCD) on the operation panel for displaying various messages and settings during operation. This LCD can display up to 20 characters on each line. When the machine is idle, the LCD shows the date, time, reception mode and the stand-by memory available. Example: When an original is placed in the RSPF, the second line changes from "STAND-BY" to "SEND READY". When the [MENU] key is pressed to configure a setting, the display appears as shown below. Example: The selected setting or entered information appears on the second line. USING THE ARROW KEYS To configure settings and program information, press the [MENU] key and then press the [ ] key ( ) or [ ] key ( ) to select the item that you wish to configure. The arrows keys can also be used while entering characters to move the cursor. Example: Press the [ ] key ( ) or [ ] key ( ) to change the item selection that appears on the second line. Note An item can also be selected after pressing the [MENU] key by pressing the numeric key for the item (the key corresponding to the number that appears in front of the item). When the numeric key is pressed, the item is selected or entered. 16