Sharp LC-37D4U LC-26GD4U LC-32GD4U LC-37GD4U Operation Manual - Page 48
Using memory card, Recording a motion picture, To display the remaining record time., Displaying
UPC - 074000363014
View all Sharp LC-37D4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using memory card Displaying a motion picture 1 Press CARD and the card mode screen displays. 2 Press c/d to select "Video", and then press ENTER. 3 Press a/b/c/d to select the file you want to play, and then press ENTER. • Video playback starts. 4 Press CARD again to display the operation panel. • See page XX for the operation panel information. • When viewing a motion picture, by pressing VIEW MODE the picture size changes. Small - Medium - Large. Recording a motion picture Use this setting to record images you are currently watching. Record with the settings made in "Rec. Mode" and "Pre Record". 1 Press REC to start recording. • CARD indicator lights up red. • Recording information displays in the lower right corner of the screen. Rec. Mode Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture. 1 Press CARD and the card mode screen displays. 2 Press MENU and the MENU screen displays. 2 Press H to stop recording. 3 Press c/d to select "Card Setup". NOTE The list of broadcasting type or input signal not available for recording: 1 COMPONENT input 2 HDMI input 3 DVI-I input 4 Card picture 5 Copy guarded signal 6 V-chip blocked program 7 i.LINK input 8 DTV Program To display the remaining record time. Press DISPLAY while not recording. • Remaining record time displays in the lower right corner of the screen. 4 Press a/b to select "Video Setup" and then press ENTER. 5 Press a/b to select "Rec. Mode", and then press ENTER. Rec. Mode Pre Record Repeat Play SP File Operation LP EP NOTE • Do not remove the AC cord from the socket. • Recording stops if you press POWER on the remote control while recording. • When card has no capacity for recording, "Card is full" displays and stops recording. • You cannot change the channel or switch the input source while recording. 6 Press a/b to select the desired mode, and then press ENTER. 47