Sharp LC-37D4U LC-26GD4U LC-32GD4U LC-37GD4U Operation Manual - Page 66

Useful adjustment settings Auto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. 1 Press MENU and the MENU screen displays. Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. 2 Press c/d to select "Setup". 1 Press MENU and the MENU screen displays. 3 Press a/b to select "Auto Sync.", and then press ENTER. 4 Press c/d to select "Yes", and then press ENTER. • Auto Sync. starts and "Now adjusting the image" displays. MENU [Setup ... Auto Sync.] 2 Press c/d to select "Setup". 3 Press a/b to select "Fine Sync.", and then press ENTER. 4 Press a/b to select the specific adjustment item. Yes No H-Pos. [90] - + V-Pos. [39] - + Clock [90] - + Phase [20] - + Reset 30% NOTE • When Auto Sync. is successful, "Auto Sync completed successfully" displays. If not, Auto Sync. failed. • Auto Sync. may fail even if "Auto Sync completed successfully" displays. • Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync. • Be sure to connect the PC to the TV and switch it on before starting Auto Sync. 5 Press c/d to adjust the item to your desired position. NOTE • For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER. Selected item Description H-Pos. V-Pos. Clock Phase Centers the image by moving it to the left or right. Centers the image by moving it up or down. Adjusts the clock frequency. Adjusts the clock phase. 65