Sharp LC-70UH30U Operation Manual - Page 104
Using a PC
View all Sharp LC-70UH30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
> Setting Audio Input Audio Select HDMI This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Devices" > "Video in" > "HDMI 3" > "Audio Select". HDMI 3 HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certified cable and audio is input via the same cable. HDMI+Analog: Select this when the TV and PC are connected using a HDMI-certified cable and the audio is input via a Ø 3.5 mm stereo minijack. NOTE When "Audio Select" is set to "HDMI+Analog", sound will not be produced if you use only an HDMI-certified cable to connect HDMIcompatible equipment. To produce sound, you should make an analog audio connection. If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set "Audio Select" to "HDMI(Digital)". "Audio Select" can only be set for the HDMI IN 3. ENG 81 ENGLISH | FRANÇAIS | ESPAÑOL