Sharp LC-70UH30U Operation Manual - Page 21
Devices
View all Sharp LC-70UH30U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
> Peek screen view The most commonly used input devices can be shown on the Devices peek screen. 1. Press / / / to select the input source, and then press (ENTER). 2. Press / to select the "Switch to Device", and the press (ENTER). An image from the selected source automatically displays. If the target input is not connected, you will be able to switch to the input, but the correct video and audio will not be output. Be sure to connect the equipment beforehand. NOTE To display the Devices in the full screen or as a peek screen, see page 2-1. Changing from a full screen view to another mode is possible. Peek screen configuration It is possible to configure which input devices to display on the peek screen. Six devices are set by default. To add a different device, first delete a current device, and then add the device. 1 Select the device in Devices full screen and open the Devices menu. 2 Set "Show in Peek" to "Yes". ENG 29 ENGLISH | FRANÇAIS | ESPAÑOL