Sharp LC22DV17UT LC-22DV17U Operation Manual - Page 10

Supplied accessories Make sure the following accessories are provided with the product. Remote control unit "AA" size battery (X1) (X2) Page 10 Page 10 AC cord (X1) Page 9 Cable Tie (X1) Page 9 Screw (X3) Page 8 Operation manual (X1) NOTE • Always use the AC cord supplied with the TV/DVD. To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD- CLOTH- 3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect. QUICK REFERENCE Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm the 3 screws supplied with the TV. Screws (X3) 3 For protection, sheets are covering the product. Please remove these sheets before use. 2 Remove the covering sheet of the stand. 1 Insert the stand to the bottom of the TV. 2 Insert and tighten the 3 screws into the 3 holes on the bottom of the stand. Soft cushion NOTE • To detach the stand, perform the step in reverse order. Screw Ventilation & Cleaning Tips Keep your TV/DVD in a well ventilated area and make sure not to place it by a heat source or use near water. The TV/DVD is designed for AC use only and should be used with supplied AC cord. Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners. 8 The screen is glass and can be scratched or broken when dropped or impacted.