Sharp LC22DV17UT LC-22DV17U Operation Manual - Page 27

Connecting a PC Personal computer

Page 27 highlights

Connecting a PC (Personal computer) Viewing an image from a PC Use the INPUT4 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT3 (HDMI) terminals.) NOTE • The PC input terminals are DDC1/2B-compatible. • Refer to "PC compatibility chart" for a list of PC signals compatible with the System. • Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before connecting with the PC. (See page 24.) • Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your PC's manuals regarding converting to external output. • You can also connect the PC with HDMI cable. If you use HDMI cable, you don't have to connect the audio cord. If you use HDMI-to-DVI cable, please connect audio cord as same way as VGA cable. Connecting the RGB cable • Connect the RGB cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug. To ANALOG RGB output terminal To PC IN terminal RGB cable (commercially available) PC To Audio output ∅3.5 mm stereo minijack cable (commercially available) To AUDIO PC/HDMI terminals input terminal Signal names for 15-pin mini D-sub connecter 543 21 10 9 8 7 6 15 14 13 12 11 Pin No Signal name R G B Not connected DGND (Ground) AGND (Ground) AGND (Ground) AGND (Ground) Pin No Signal name DSUB_5 GND (Ground) Not connected DDCD VGAHS VGAVS DDCC Displaying an image from a PC To view an image from a PC, perform the following procedure. ① Select the Input4 (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 15.) ② Select the PC input signal. ③ Adjust the "Picture" items if the PC image does not come in clearly. (See page 24.) PC compatibility chart PC Resolution Horizontal Frequency Vertical Frequency VESA Standard 720 x 400 31.5 kHz 70 Hz - 31.5 kHz 60 Hz ○ VGA 640 x 480 37.9 kHz 72 Hz ○ 37.5 kHz 75 Hz ○ 35.1 kHz 56 Hz ○ 37.9 kHz 60 Hz ○ SVGA 800 x 600 48.1 kHz 72 Hz ○ PC 46.9 kHz 75 Hz ○ 48.4 kHz 60 Hz ○ XGA 1,024 x 768 56.5 kHz 70 Hz ○ 60.0 kHz 75 Hz ○ 1,280 x 720 44.8 kHz 60 Hz ○ WXGA 1,280 x 768 47.8 kHz 60 Hz - 1,360 x 768 47.7 kHz 60 Hz ○ 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

25
Connecting a PC (Personal computer)
Viewing an image from a PC
Use the INPUT4 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT3 (HDMI) terminals.)
NOTE
• The PC input terminals are DDC1/2B-compatible.
Refer to “PC compatibility chart” for a list of PC signals compatible with the System.
Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before
connecting with the PC. (See page 24.)
Depending on the PC being used, images may not be shown without converting the output signals into external output.
Please refer to your PC’s manuals regarding converting to external output.
You can also connect the PC with HDMI cable. If you use HDMI cable, you
don’t have to connect the audio cord. If you use HDMI-to-DVI cable, please
connect audio cord as same way as VGA cable.
Displaying an image from a PC
Connecting the RGB cable
Connect the RGB cable making sure
that it
ts correctly into the terminal.
Then,
rmly secure the connectors by
tightening the screws on both sides
of the plug.
To ANALOG RGB
output terminal
To PC IN
terminal
RGB cable
(commercially available)
3.5 mm stereo minijack cable
(commercially available)
To AUDIO PC/HDMI
input terminal
To Audio output
terminals
PC
To view an image from a PC, perform the following
procedure.
Select the Input4 (PC) mode using
INPUT
on the remote
control or the TV/DVD set. (See page 15.)
Select the PC input signal.
Adjust the “Picture” items if the PC image does not come
in clearly.
(See page 24.)
PC compatibility chart
15
14
13
12
9
11
10
8
7
6
5
4
3
2
1
Pin No.
Signal name
Pin No.
Signal name
R
DSUB_5
G
GND (Ground)
B
Not connected
Not connected
DDCD
DGND (Ground)
VGAHS
AGND (Ground)
VGAVS
AGND (Ground)
DDCC
AGND (Ground)
Signal names for 15-pin mini D-sub connecter
PC
Resolution
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
PC
VGA
720 x 400
31.5 kHz
70 Hz
-
640 x 480
31.5 kHz
60 Hz
37.9 kHz
72 Hz
37.5 kHz
75 Hz
SVGA
800 x 600
35.1 kHz
56 Hz
37.9 kHz
60 Hz
48.1 kHz
72 Hz
46.9 kHz
75 Hz
XGA
1,024 x 768
48.4 kHz
60 Hz
56.5 kHz
70 Hz
60.0 kHz
75 Hz
WXGA
1,280 x 720
44.8 kHz
60 Hz
1,280 x 768
47.8 kHz
60 Hz
-
1,360 x 768
47.7 kHz
60 Hz