Sharp LC37SH12U LC-32D43U LC-37D43U Operation Manual - Page 8

Supplied accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery (g1) (g2) Page 8 Page 8 AC cord (g1) Page 7 NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Cable Clamp (g1) Cable tie (g1) Page 7 Stand unit (g1) Page 6 Operation manual (g1) Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are 9 screws (all the same size) supplied with the TV. 3 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. 2 1 Set the post for the stand unit onto the box. 2 Attach the base to the post. 3 Insert and tighten the 5 screws into the 5 holes on the bottom of the base. Hex key Screw Soft cushion Hex key Screw 6 NOTE • To detach the stand, perform the steps in reverse order.