Sharp MT821 Operation Manual - Page 11
Recording from CDs or MDs Synchro recording, To interrupt recording, To stop recording - md minidisc
UPC - 074000410473
View all Sharp MT821 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
n Recording from CDs or MDs (Synchro recording) 0 Svnchro recording is a method that detects the playback sound from the source equipment. When sound is present, it automatically s t a r t s recording. When the sour&is silent, the recordina will be paused 0 Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between -4 dB and 0 dB. 0 To record from a CD, first adjust the recording level. Then put the equipment connected to this unit into the playback stand-by mode. 1. connect the external equipment. (See page 8.) 5 Press the ENTER/SYNC button. . Insert a recordable MiniDisc. 0 6 Begin playback on the source equip- ment. 0 Recording will begin automatically. 3 Press the REC button. 0 To record from a tuner, first tune in a broadcast. 0 To record from a CD, first start playing the track you want to record. 4 While playing sound from the external equipment connected to this unit, move the H1 REC LEVEL H shuttle switch to adjust the recording level. To interrupt recording: When the source equipment is stopped, the unit will enter the synchro recording stand-by mode. When playback is resumed, a recording will be resumed. If a silence lasts for 3 seconds or more, the recording will be paused. Pressing the HI button on this unit (when in this mode) will cause the unit to enter the recording stand-by mode and cancel the synchro recording mode. To stop recording: Press the U:OFF button. 0 If the unit is left unattended after the recording is complete, the power will automatically shut off in approximately 2 minutes. OdB -4dB 10