Sharp MT821 Operation Manual - Page 24

H Cue and review 1 Load a MiniDisc and begin playback. n APSS (Auto Proaram Search system 2 Move and hold the shuttle switch at H for audible fast forward, or move and hold the shuttle switch at H1 for audible fast reverse. 3 Normal playback will resume when the shuttle switch (HI or m) is released. APSS automatically locates the beginning of any track. To move to the beginning of the next track: Move the shuttle switch tom during playback. To re-start the track being played: Move the shuttle switch to H1 during playback. To skip a number of tracks at one time, move the shuttle switch to HI or H repeatedly until the desired track number is shown. To begin playback at a desired track, move the shuttle switch to H1 or m while in the stop mode to select the track number. Then press the ,I[ button. Note: 0 When the first track is selected and the shuttle switch is moved to H1, the last track on the disc will be located. When the last track is selected and the shuttle switch is moved to m, the first track will be located. Notes: When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. When the unit is in the all track repeat mode, the search will wrap around from the last track to the first, or vice versa. Depending on the contents recorded on a MiniDisc, some sounds may be skipped while cueing and reviewing. To search very quickly: When fast forward or fast reverse is used while in the pause mode, the search will be performed more quickly than during audible fast forward or fast reverse playback. 0 In this mode, no sound is heard. There- fore, you should refer to the time dis- play. 0 When you lift your finger, the unit will re- enter the pause mode. 23