Sharp MX-2615N Operating Guide - Page 728
Energy Save
View all Sharp MX-2615N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 728 highlights
SYSTEM SETTINGS Energy Save The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings. Eco Scan Setting Non-print functions such as image sending and document filing function can be executed while he fusing unit is kept Off. Whether to enable the Eco Scan setting can be specified for each mode or screen. • Home Screen • Copy • Image Send • Document Filing • System Settings • Sharp OSA Power Management Setting Auto Power Shut-Off can be enabled or disabled, and Toner Save Mode can be set as well as Preheat Mode. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. Toner Save Mode You can reduce the amount of toner used for printing. Print data Print example when "Toner Save Mode" is enabled [Print] in Toner Save Mode is only effective when the machine's printer driver is not used. When the printer driver is used, the printer driver setting takes precedence. This function may not operate in some applications and operating systems. Preheat Mode Setting The time until Preheat Mode activates can be set to any number of minutes from 1 to 60. Preheat Mode will activate when the set duration of time elapses after printing ends and no further operations are performed. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. Select the time that best suits the needs of your workplace. Turn off Panel Display during pre-heat mode Setting this checkbox to turns off the panel display in Preheat Mode. Preheat mode cannot be disabled. Auto Power Shut-Off This setting enables or disables Auto Power Shut-Off. Remove the checkmark if you prefer that Auto Power Shut-Off does not operate. When the set duration of time elapses after printing ends, Auto Power Shut-Off activates and causes to machine to go on standby at a minimal level of power consumption. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. It is recommended that you understand the objective behind the energy save functions and instead of using the machine in the state where the Auto Power Shut-Off function is disabled, adjust the settings such that the time till Auto Power Shut-Off is enabled is a little longer or set a time zone for Auto Power Shut-Off. (Settings that depend on the usage conditions, such as the time till Auto Power Shut-Off is enabled can be configured in the following "Auto Power Shut-Off Timer".) 7-61 Contents