Sharp MX-3111U MX-3111U Operation Guide - Page 795
Removing Staple Jams
View all Sharp MX-3111U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 795 highlights
TROUBLESHOOTING REMOVING STAPLE JAMS Follow the steps below to remove a staple jam. ☞ FINISHER FINISHER Open the cover. 1 While pressing the lever over to the left, slide the finisher to the left until it stops. 2 Gently slide the finisher until it stops. Lower the staple case release lever and remove the staple case. 3 Pull the staple case out to the right. Raise the lever at the front end of the staple case and remove the jammed staple. Remove the leading staple if it is bent. If bent staples remain, a 4 staple jam will occur again. Take care that a bent staple does not hurt you. 8-11 Contents
8-11
TROUBLESHOOTING
Contents
Follow the steps below to remove a staple jam.
☞
FINISHER
FINISHER
REMOVING STAPLE JAMS
1
Open the cover.
2
While pressing the lever over to the left,
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Take care that a bent staple does not hurt you.