Sharp VL-WD250U VLWD250U Operation Manual - Page 29
Using the Viewfinder
View all Sharp VL-WD250U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparation Using the Viewfinder You can record the subject using the electronic LCD viewfinder. You can also watch playback through the viewfinder. Viewfinder Power switch 1 Lift up the viewfinder. Note: • You can raise the viewfinder to aim the camcorder better depending on your position. 2 Hold down the Lock button and set the Power switch to CAMERA or VCR. • A picture is displayed in the viewfinder. Lock button Closing the viewfinder Lower the viewfinder. Cautions: • Do not use excessive force when moving the viewfinder. • Do not pick up the camcorder by the viewfinder. Notes: • The viewfinder automatically turns off when the LCD monitor is opened. When the vertical rotation of the monitor is between 135° and 180°, however, the viewfinder is on and the subject is displayed both in the viewfinder and on the monitor (see page 39). • Be sure to close the viewfinder after use. Adjusting the Diopter Adjust the diopter according to your eyesight when the picture in the viewfinder is not clear. 1 Lift up the viewfinder. 2 Hold down the Lock button and set the Power switch to CAMERA. 3 While looking through the viewfinder, turn the Diopter adjustment until the indicators in the viewfinder are clearly visible. Diopter adjustment 16