Sharp VL-WD250U VLWD250U Operation Manual - Page 63
Using the Zoom Microphone
![]() |
View all Sharp VL-WD250U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using the Zoom Microphone (Optional Accessory) With the optional zoom microphone VR-5MCN, you can record audio according to the magnification of the zoom lens for producing the optimum sound. You can also set the zoom microphone to record only sounds at a distance. Mounting the Zoom Microphone 1 Align the mounting pin of the zoom microphone with the mounting hole on the camcorder, and slide the zoom microphone in the direction of the arrow until it locks into place. Mounting hole Selecting Zoom Microphone Mode Select a Zoom Microphone mode when the zoom microphone is mounted. Type of Zoom Microphone modes AUTO: The camcorder automatically selects the optimum sound according to the magnification of the zoom lens. When the zoom lens is at a wide-angle setting, the built-in microphone is used to record sounds. As the zoom magnification increases, the sounds from the zoom microphone and built-in microphone are mixed according to the zoom setting. TELE: The zoom microphone is fixed to record sounds at a distance. (The built-in microphone is turned off.) OFF: The zoom microphone is turned off. (The built-in microphone is on.) 1 Mount the zoom microphone to the camcorder. Mounting pin 2 Set the camcorder to CAMERA mode. 2 Turn the screw in the direction of the arrow to secure the zoom microphone. Screw 3 Press the MENU/DISPLAY button until the menu screen appears. 4 Select U, then press r on the Opera- tion button. Select "ZOOM MIC" (1), then press r (2). AUD I O SE T AUD I O MODE ZOOM M I C AUTO TELE OFF Advanced Features Removing the zoom microphone Turn the screw in the opposite direction than when mounting, and then pull off the zoom microphone. 5 Press d or y to select the desired zoom microphone mode, then press e. • The selected zoom microphone mode is Caution: displayed on the menu screen. • Do not pick up the camcorder by the zoom microphone, as this may cause the camcorder Z OOM M I C AUTO or zoom microphone to break down. 6 Press the MENU/DISPLAY button to turn off the menu screen. Note: • When the camcorder is in Easy mode, the Zoom Microphone mode is fixed to "AUTO" and cannot be selected on the menu screen. 50
![](/manual_guide/products/sharp-vlwd250u-vlwd250u-operation-manual-a3edfa9/63.png)