Singer 14T968DC PROFESIONAL 5 Instruction Manual 2 - Page 121
Before threading the eye of the needle, make sure the thread is
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
5. Continue to thread points 4-8. Slip the thread into the rear slot of the thread guide . Go over the take up lever . Continue by slipping the thread into the right slots of the thread guides and . 8. Before threading the eye of the needle, make sure the thread is behind the thread guide located on the bottom of the needle clamp. 9. Draw about 4 inches of the thread through the needle eye towards the back of the machine. 10. Place the thread to the back, under the Presser Foot. Lower foot and sew. Three-Thread Rolled Hem Page 12
5. Continue to thread points 4-8.
Slip the thread into the rear slot of the
thread guide
g
.
Go over the take up lever
h
.
Continue by slipping the
thread into the right slots of the thread guides
i
and
j
.
8. Before threading the eye of the needle, make sure the thread is
behind
the thread guide located on the bottom of the needle clamp.
9. Draw about 4 inches of the thread through the needle eye towards the back
of the machine.
10. Place the thread to the back, under the Presser Foot. Lower foot and sew.
Three-Thread Rolled Hem Page 12