Singer 14T968DC PROFESIONAL 5 Instruction Manual 2 - Page 25
tension disks.
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
10. Thread the looper eye (A) from front to back. Pull about 4 inches of thread. Position thread into V cutout (B) on threader. Firmly hold thread tail with left hand and pull Threader lever (C) up into place (D). "V" cutout Threader Lever Thread Chainstitch Looper with regular overlock thread. 1. Raise the Presser Foot to release the tension disks. Pass the thread from the back to the front through the thread guide . Four-Thread Safety Stitch page 8
Four-Thread Safety Stitch page 8
10. Thread the looper eye (A) from front to back.
Pull about 4 inches of thread.
Position thread into V cutout (B) on threader.
Firmly hold thread tail with
left hand and pull Threader lever (C) up into place (D).
±
Thread Chainstitch Looper with regular overlock thread.
1. Raise the Presser Foot to release the
tension disks.
Pass the thread from
the back to the front through the
thread guide
c
.
Threader Lever
“V” cutout