Singer 14T968DC PROFESIONAL 5 Instruction Manual 2 - Page 86

Slide the Seam Guide Plate into place.

Get Singer 14T968DC PROFESIONAL 5 PDF manuals and user guides View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

Install the Seam Guide Plate. The Seam Guide Plate provides a flat surface for the fabric and seam guides. It can only be used when the knife and the lower looper are disengaged. The Seam Guide Plate is used when sewing the Chainstitch, Cover Stitch and the Triple Cover Stitch. 1. Open Looper Cover. 2. Remove Knife Cover by pulling it toward you. 3. Slide the Seam Guide Plate into place. Disengage Upper Looper. By disengaging the Upper Looper the looper no longer moves when sewing, it is nonoperative. If the looper was still engaged it would hit the Seam Guide Plate. 1. Turn handwheel until the Upper Looper is in the highest position. 2. Push the clutch button to the left and up to disengage. Upper Looper Engaged Upper Looper Disengaged Cover Hem Wide page 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
±
Install the Seam Guide Plate
.
The Seam Guide Plate provides a flat surface for the
fabric and seam guides.
It can only be used when the knife and the lower looper are
disengaged.
The Seam Guide Plate is used when sewing the Chainstitch, Cover
Stitch and the Triple Cover Stitch.
1. Open Looper Cover.
2. Remove Knife Cover by pulling it toward you.
3. Slide the Seam Guide Plate into place.
±
Disengage Upper Looper.
By disengaging the Upper Looper the looper no longer
moves when sewing, it is nonoperative.
If the looper was still engaged it would hit
the Seam Guide Plate.
1. Turn handwheel until the Upper Looper is in the
highest position.
2. Push the clutch button to the left
and up
to
disengage.
Upper Looper Disengaged
Cover Hem Wide page 5
Upper Looper Engaged