Singer One Instruction Manual 5 - Page 24

Blind hem/ lingerie stitch * The blindhem foot is an optional accessory not supplied with this machine. For hems, curtains, trousers, skirts, etc. Blind hem for stretch fabrics. (for models B, C & D) Blind hem/lingerie for firm fabrics. Set the machine as illustrated (1). Note: It takes practice to sew blind hems. Always make a sewing test first. Fold the fabric as illustrated with the wrong side uppermost (2). Place the fabric under the foot. Turn the handwheel forwards by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the stitch width accordingly (3). Adjust the guide (4) by turning the knob (5) so that the guide just rests against the fold. Sew slowly, guiding the fabric carefully along the edge of the guide. Turn the speed control to minimum! It takes practice to sew blind hems. Always make a sewing test first. Stitch width dial (models A & B) 4321 5 Stitch length dial (models A, B & C) 321 0 0 S2 4 S1 All purpose foot Blindhem presser foot (Optional) 1 2 3 5 4 21