Singer One Instruction Manual 5 - Page 34

Free motion darning * The darning foot is an optional accessory not included with your machine. Set the pattern selector dial to " " or " ".(1) Install the darning plate (2). Remove the presser foot clamp (3). Attach the darning foot to the presser foot holder. The lever (A) should be behind the needle clamp screw (B). Press the darning foot on firmly from behind with your index finger and tighten the screw (C) (4). First sew around the edge of the hole (to secure the threads) (5). First row: Always work from left to right. Turn work by 1/4 and oversew. A darning ring is recommended for easier sewing and better results. Note: Free motion darning is accomplished without the sewing machine internal feed system. Movement of the fabric is controlled by the operator. It is necessary to coordinate sewing speed and movement of fabric. Stitch width dial (models A & B) 4321 5 Stitch length dial (models A, B & C) 0 1 432 S1 0 S2 Darning foot (Optional) Note: Stitch length cannot be controlled with dial as feed dogs are lowered. 1 2 A B C 5 3 4 31