Singer One Instruction Manual 5 - Page 29
Sewing with the optional hemmer foot
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Sewing with the optional hemmer foot * The hemmer foot is an optional accessory not supplied with your machine. For hems in fine or sheer fabrics. Set the stitch pattern dial to " " or " ". Change to optional hemmer foot. Neaten the edge of the fabric. At the beginning of the hem, turn under the edge twice by about 3 mm (1/8") and sew 4-5 stitches to secure. Pull the thread slightly towards the back. Insert the needle into the fabric, raise the presser foot and guide the fold into the scroll on the foot (1). Gently pull the fabric edge towards you and lower the presser foot. Begin sewing, guiding the fabric into the scroll by holding it upright and slightly to the left (2). Stitch width dial (models A & B) 4321 5 Hemmer foot (Optional) 0 0 S2 4 Stitch length dial (models A, B & C) 321 S1 1 2 26