Singer S900 INSPIRATION Instruction Manual 2 - Page 27
position lever
View all Singer S900 INSPIRATION manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
26 1. Set stitch length regulating dial for "satin" stitcft 2. Set needle position lever in left notch. 3. Set zigzag stitch dial between "o"-"l". 4. Start sewing and move needle position lever from the left notch to the center notch, to the right notch. Leave needle position lever in right notch. 5. While machine is still in operation, switch zigzag stitch lever to "4". Sew at this position for desired length, then turn zigzag stitch lever back to between "o" and "1". 6. Repeat operation, by moving needle position lever from right notch to center and to left notch. 1. Set stitch legth regulating dial for "satin" stitch. 2. Set zigzag stitch dial at "1". 3. Set needle position lever in left notch. 4. Start sewing. and move needle position lever to center notch, to right notch, and back again, using all three notches. Length of design is contrdled by the speed at which the position lever is operated,and the time during which it is allowed to remain in each notch. 1. Set needle position lever in center notch. 2.Set stitch length regulating dial for "satin" stitch. 3. Set zigzag stitch dial at "1". 4. Start sewing to desired length, then turn zigzag stitch dial to "4". Stitch desired length, then turn zigzag stitch dial back to "1". Repeat operation. Length of design is controlled by length of time that machine is allowed to stitch at each setting of zigzag stitch lever. NOTE: These instructions show you how to make some of the various designs that this zigzag can create, simply and with a minimum of practice on the part of the operator by using a combination of the zigzag sttich lever and the needle position lever. After a little practice with the levers, you soon will be making your own exclusive designs.