Sony A2770 Operating Instructions

Sony A2770 - SPP Cordless Phone Manual

Get Sony A2770 - SPP Cordless Phone PDF manuals and user guides
UPC - 027242585249
View all Sony A2770 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony A2770 manual content summary:

  • Sony A2770 | Operating Instructions - Page 1
    3-232-389-12 (1) Cordless Telephone with Answering System Operating Instructions US Hearing-Aid Compatible SPP-A2770 ©2001 Sony Corporation
  • Sony A2770 | Operating Instructions - Page 2
    your Sony dealer regarding this product. Model No. SPP-A2770 Serial No 2US Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Privacy of communications may not be ensured when using this phone. Note
  • Sony A2770 | Operating Instructions - Page 3
    the operation of the equipment. If this happens the telephone company will provide advance notice so you can make the necessary modifications to maintain uninterrupted service. 7. If trouble is experienced with this equipment (SPP-A2770), for repair or warranty information, please contact Sony
  • Sony A2770 | Operating Instructions - Page 4
    fuga de gas, no utilice el teléfono en la vecindad de dicha fuga. 4. Utilice solamente el cable de alimentación y las pilas indicados en este manual. No tire las pilas al fuego. Podrían explotar. Compruebe los códigos locales con respecto a las instrucciones especiales sobre cómo deshacerse de ellas
  • Sony A2770 | Operating Instructions - Page 5
    este equipo (SPP-A2770), con respecto a la reparación o a la información sobre la garantía, póngase en contacto con Sony Direct Response Center .Este equipo es compatible con dispositivos para ayuda a la audición. Cuando programe números de emergencia y (o) realice llamadas de prueba a los mismos:
  • Sony A2770 | Operating Instructions - Page 6
    the battery Phone Directory memory 48 Locating the handset 49 Switching the phones during a call Intercom Operation 50 Talking between the phones - Intercom - Walkie-Talkie function 51 Transferring a call Answering Machine Features cordless handset 64 To answer the call 6US Table of contents
  • Sony A2770 | Operating Instructions - Page 7
    75 To change the number of digits of the phone number 77 Using "Caller ID with call waiting" service Additional Information 78 Carrying the cordless handset by the belt clip 79 Notes on power sources 80 Maintenance 81 Troubleshooting 85 Specifications 86 Index Back cover LIMITED WARRANTY Table
  • Sony A2770 | Operating Instructions - Page 8
    First, read the followings. • The system includes a cordless handset. If you utilize the walkie- talkie feature, it is necessary to purchase the SPP-H273 Sony cordless handset used for the QuadraStation 2.4 exclusively. • Be sure to register the additional cordless handset(s) to the base unit before
  • Sony A2770 | Operating Instructions - Page 9
    set up your phone: Steps 1 to 6. Step 1 (page 10) First, unpack the phone and the supplied battery pack into the cordless handset and charge it for more than 12 hours. Step 4 (page 16) Choose an appropriate dialing mode. Step 5 (pages 17 to 20) Enter the area code to use the Caller ID service
  • Sony A2770 | Operating Instructions - Page 10
    Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. AC power adaptor (AC-T133) Base unit Cordless handset Telephone line cord Rechargeable battery pack (BP-T38) 10US Getting Started
  • Sony A2770 | Operating Instructions - Page 11
    Where you place the base unit affects the reception quality of the cordless handset. Away from noise sources such as a window by a street base or move base unit away from other noise sources. • The cordless telephone operates at a frequency that may cause interference to nearby TVs, VCRs, and
  • Sony A2770 | Operating Instructions - Page 12
    Step 2: Setting up the base unit (continued) Connect the base unit 3 Hook the cord. 2 To an AC outlet To DC IN 9V AC power adaptor (supplied AC-T133) To LINE 1 To a telephone outlet Telephone line cord (supplied) 1 Connect the telephone line cord to the LINE jack and to a telephone outlet.
  • Sony A2770 | Operating Instructions - Page 13
    so that you can unplug the AC power adaptor easily. Polarity of the plug Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Modular Getting Started Getting Started 13US
  • Sony A2770 | Operating Instructions - Page 14
    pack for more than 12 hours before you start using your cordless handset. 1 Slide open the battery compartment lid of the cordless handset. BP-T38 Red Black 2 Connect the battery connector with correct polarity (black wire goes on lower side and red wire goes on upper side). Hook 3 Hook the
  • Sony A2770 | Operating Instructions - Page 15
    Getting Started About the station number When you start charging the battery, "HANDSET 1" appears on the display of the cordless handset. This shows the ID number for each cordless handset and base unit of the system, called "station number." The station number of the base unit is set to 0 and that
  • Sony A2770 | Operating Instructions - Page 16
    . You cannot set the dialing mode while the system is in use. * If the system includes additional cordless handsets, it is necessary to stop using them before You hear a long confirmation beep. If you aren't sure of your dialing system Make a trial call with the dialing mode set to TONE. If the call
  • Sony A2770 | Operating Instructions - Page 17
    with this telephone to take advantage of this system. See "To enter the local area code (For 10 digits phone number users)" on page 19. Case 2. If 10- area code (For 10 digits phone number users)" on page 19. Entering the area code is only possible on the cordless handset. Make sure the base unit
  • Sony A2770 | Operating Instructions - Page 18
    the operation procedure. • Phone Directory cannot be performed. • If the home area code is not correctly entered, "ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset system includes additional cordless handsets
  • Sony A2770 | Operating Instructions - Page 19
    area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the
  • Sony A2770 | Operating Instructions - Page 20
    Step 5: Entering the area code (continued) To change the local area code 1 Perform steps 1 to 3 on page 19. The current local area code appears on the display. 2 Press (ERASE) to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You hear a long
  • Sony A2770 | Operating Instructions - Page 21
    time when you play back messages. You can set the day and time only with the cordless handset. Make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Turn
  • Sony A2770 | Operating Instructions - Page 22
    long confirmation beep. Then the phone starts counting time. Notes • Do not allow more than 60 seconds to elapse during the operation procedure. • "PF" flashes on use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you
  • Sony A2770 | Operating Instructions - Page 23
    services e.g. long distance provider. Also, you can set up just a phone number with the function for onetouch dialing. When the system has two or more cordless handsets, you can assign a different access number or phone number to each cordless handset to elapse during the operation procedure. • You
  • Sony A2770 | Operating Instructions - Page 24
    see page 33. -for redialing, see page 35. -for making calls from the Phone Directory, see page 43. -for making calls from Caller ID list, see page 72 store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 3 on page 23, do as follows: 1 Enter the outside
  • Sony A2770 | Operating Instructions - Page 25
    additional cordless handsets The phone system includes a cordless handset. You can expand the system including a total of four cordless handsets. Be sure to register the ID number of the additional cordless handset called "station number" to the base unit before using the additional cordless handset
  • Sony A2770 | Operating Instructions - Page 26
    number of the cordless handset appears on the display of the cordless handset while it is seated on the charger. You can also utilize the supplied sticker of the station number and attaching on the cordless handset. (For details, see Operating Instructions of SPP-H273.) HANDSET 2 NEW OLD MASSAGE
  • Sony A2770 | Operating Instructions - Page 27
    choose "SI", and then press Jog Dial. You will hear a long confirmation beep. Note Do not allow more than 60 seconds to elapse during the operation procedure. To change the language from Spanish to English 1 Press (PGM). 2 Turn Jog Dial to choose "ENGLISH", and then press Jog Dial. 3 Turn Jog
  • Sony A2770 | Operating Instructions - Page 28
    qh qj 1 CHARGE lamp (p. 14) Lights while the battery is being charged. 2 IN USE lamp (p. 32) Lights when the handset is in use. 3 Speaker 4 ANSWER ON/OFF button back to the previous message. Keep the button pressed for a playback review of the current message. 6 MESSAGE PLAY/STOP button (p. 60)
  • Sony A2770 | Operating Instructions - Page 29
    . qf GREETING PLAY button (p. 53) Plays back a greeting. qg DAY/TIME button (p. 22) Press to check the current time. qh HANDSET LOCATOR button (p. 48) Allows you to page the handset. qj MIC (microphone) (p. 52, 65) qk Antenna (p. 12) ql Hook for AC power adaptor cord (p. 12) w; DC IN 9V jack
  • Sony A2770 | Operating Instructions - Page 30
    messages. 6 Battery compartment (p. 14) 7 CALL WAITING/FLASH button (p. 33, 77) Switches to a second call if you have "call waiting" service, or lets you 50, 51) Lets you talk between the cordless handsets (when the system has any other additional cordless handsets). qs Dialing keys (p. 32) qd ERASE
  • Sony A2770 | Operating Instructions - Page 31
    37, 78) qk VOL (volume) switch (p. 33) Adjust the cordless handset volume. ql SKIP > button (p. 61) Press to skip to the next message. w; # button (p. 75) Used to change the number of digits of the phone number in the Caller ID list. wa PGM (program) button (p. 17, 39) ws REDIAL/PAUSE button (p. 24
  • Sony A2770 | Operating Instructions - Page 32
    beeps and "NO CONNECTION" appears on the display, move closer to the base unit. (EZ ACCESS) (ERASE) (CALL WAITING/FLASH) 3 Dial the phone number. 4 When you're done talking, press (OFF) or replace the cordless handset on the base unit. The display turns off. To make a call after checking the
  • Sony A2770 | Operating Instructions - Page 33
    cordless handset from the base unit. 2 Dial the phone number (e.g., 1-201-123-4567, or 011-...). 3 Press (EZ ACCESS). The system service*2) Do this Set the VOL switch to H (high), M (middle) or L (low). Press (HOLD). "HOLD" appears on the display. Press (HOLD) again or pick up the cordless handset
  • Sony A2770 | Operating Instructions - Page 34
    the initial charge time (approx. 10 minutes), "PLEASE WAIT..." and "BATTERY LOW" appear on the display and the cordless handset cannot be used. After "BATTERY LOW" turns off, you may be able to use the cordless handset, but the battery duration will be very short; thus it is recommended that you
  • Sony A2770 | Operating Instructions - Page 35
    Redialing The cordless handset stores five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial. 3 Press Jog Dial. (EZ ACCESS) (PGM) 4 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will
  • Sony A2770 | Operating Instructions - Page 36
    Jog Dial to choose "YES", and then press Jog Dial. You hear a long confirmation beep, and the number is erased. To erase the entire dialed phone numbers at once 1 Press (PGM). 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Turn Jog Dial to choose "ERASE ALL RDL
  • Sony A2770 | Operating Instructions - Page 37
    Basics Receiving calls (HOLD) (CALL WAITING/FLASH) (PGM) I (HEADSET) jack VOL switch 1 When you hear the phone ring: • Press (TALK). or • Pick up the cordless handset from the base unit when the cordless handset is placed on the base unit. (When Quick talk is set to "ON"; see page 38) "TALK"
  • Sony A2770 | Operating Instructions - Page 38
    service from your telephone company. Tip To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer volume on the cordless handset service. • the name stored in the Phone Directory appears on the display if the call matches the number stored in the Phone
  • Sony A2770 | Operating Instructions - Page 39
    Features Telephone Features Phone Directory You can dial a number by scrolling through the Phone Directory, in which up to 50 phone numbers can be stored. When the system has two or more cordless handsets, you can store a different set of phone numbers to each cordless handset. Storing phone
  • Sony A2770 | Operating Instructions - Page 40
    digits or more has been entered, the phone number appears in two lines. SONY 1234567_ NEW OLD MASSAGE RING OFF SONY 1234567890123456 78_ NEW OLD MASSAGE RING OFF 6 Press (PGM). You hear a long confirmation beep, and the name and the number are stored. The display goes off. 40US Telephone Features
  • Sony A2770 | Operating Instructions - Page 41
    of up to 20 digits can be stored in the Phone Directory. 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial, and then press Jog Dial. 3 Turn Jog Dial to choose "PROGRAM", and then press Jog Dial. 4 Enter the name by doing steps 3 and 4 on
  • Sony A2770 | Operating Instructions - Page 42
    Directory Turn Press 1 Press Jog Dial. "PHONE DIRECTORY" appears on the display. PHONE DIRECTORY ABC DEF NEW OLD MASSAGE RING OFF (TALK turning Jog Dial. TUV WXYZ etc NEW OLD MASSAGE RING OFF BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 4 Press Jog Dial. (GO BACK) DIAL EDIT NEW
  • Sony A2770 | Operating Instructions - Page 43
    Telephone Features 5 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will be dialed. Tips • When memory of the next following group will be displayed. • You may press (TALK) on the cordless handset to make a call instead of doing steps 4 and 5. • If an access number of the
  • Sony A2770 | Operating Instructions - Page 44
    Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 42. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING step. 5 Press (PGM). The cursor is at the right of the phone number. 6 Press (ERASE) to erase the number, and enter the new number.
  • Sony A2770 | Operating Instructions - Page 45
    Telephone Features Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on page 42. 2 Press Jog Dial. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF 3 Turn Jog Dial to choose
  • Sony A2770 | Operating Instructions - Page 46
    (when the system has any other additional cordless handsets) The Phone Directory memory can be transferred one by one or all at once (with a maximum of 50 numbers) from a cordless handset to an additional cordless handset. This function works only when one or more additional cordless handsets are
  • Sony A2770 | Operating Instructions - Page 47
    Telephone Features To transfer all phone numbers from the Phone Directory The Phone Directory system has an additional cordless handset Skip this step. When the system has two or more additional cordless handsets Turn Jog Dial to choose "TO HANDSET 2" or station number of the cordless handset
  • Sony A2770 | Operating Instructions - Page 48
    from the base unit. Note that you cannot page if the handset is in use. Press (HANDSET LOCATOR). All the cordless handsets on the system ring for about one minute. To stop ringing, press (OFF) on any of them. Tip You can page the handset even when "RINGER VOLUME" is set to "RING OFF". 48US Telephone
  • Sony A2770 | Operating Instructions - Page 49
    the phones during a call (when the system has any other additional cordless handsets) You can easily switch from the cordless handset to another cordless handset without disconnecting the call. This function works only when one or more additional cordless handsets are available on the system
  • Sony A2770 | Operating Instructions - Page 50
    Intercom Operation Talking between the phones - Intercom - Walkie-Talkie function (when the system has any other additional cordless handsets) You can make an intercom conversation between a couple of cordless handsets (Walkie-Talkie function) of the same phone system far from the base unit (e.g.
  • Sony A2770 | Operating Instructions - Page 51
    a call (when the system has any other additional cordless handsets) Intercom Operation You can transfer a call between the cordless handsets without disconnecting the call. This function works only when one or more additional cordless handsets are available on the system. Example: Transferring
  • Sony A2770 | Operating Instructions - Page 52
    Answering Machine Features Preparing the answering machine Recording the greeting This answering machine has prerecorded greetings (30 cm) away from the microphone. 3 Press (MESSAGE PLAY/STOP) to stop recording. The phone automatically replays the recorded greeting. 52US Answering Machine Features
  • Sony A2770 | Operating Instructions - Page 53
    minute have passed in step 2, recording stops automatically. • To record the greeting from a touch-tone phone, see page 67. Prerecorded greeting Normal mode: "Hello, I'm unable to answer your call right now bring back the original greeting. Answering Machine Features continued Answering Machine
  • Sony A2770 | Operating Instructions - Page 54
    with the cordless handset. Make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets, it " to Mode "TOLL SAVER" If new messages have been recorded, the phone answers at the second ring and records incoming messages; if no new messages
  • Sony A2770 | Operating Instructions - Page 55
    operation procedure. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset cordless handset. Make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets
  • Sony A2770 | Operating Instructions - Page 56
    • Do not allow more than 60 seconds to elapse during the operation procedure. • The approx. length of the three recording grades are: the cordless handset. Make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets, it Machine Features
  • Sony A2770 | Operating Instructions - Page 57
    • Do not allow more than 60 seconds to elapse during the operation procedure. • The same greeting is used regardless of the answering mode are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base unit, make sure the base unit is Features continued Answering Machine
  • Sony A2770 | Operating Instructions - Page 58
    and the phone automatically switches the messages from an outside phone (see page 67). Setting cordless handset. Make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets move the cordless handset closer to the base unit
  • Sony A2770 | Operating Instructions - Page 59
    answer a call after 10 rings even if the answering function is off. • You can also turn on or off the answering function from an outside phone (see page 67). To turn off the answering function Press (ANSWER ON/OFF) so that the red light goes off. Answering Machine
  • Sony A2770 | Operating Instructions - Page 60
    on both the base unit and the cordless handset. When the phone is not in use and not in announcement only mode, the message counter shows the following. (ANSWER ON/OFF) (VOL +) (VOL -) (ERASE) Message counter SKIP >/QUICK (MESSAGE PLAY/STOP) REPEAT ./REVIEW When you come home If (ANSWER ON
  • Sony A2770 | Operating Instructions - Page 61
    call comes in during playback, the playback stops. • You cannot reproduce a message in quick play or review play with the cordless handset. Tips • You can also listen to the messages or erase the messages from a outside phone (page 67). • During playback of messages with Caller ID data, the name and
  • Sony A2770 | Operating Instructions - Page 62
    the display are black, it means that the memory is full. You can perform the following procedure only with the cordless handset. 1 Press (PGM). 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Turn flash on the message counter on the base unit. 62US Answering Machine Features
  • Sony A2770 | Operating Instructions - Page 63
    are erased. Note If a power interruption occurs or the AC power adaptor is disconnected while erasing a message, all recorded message may be erased. Answering Machine Features 63US Answering Machine
  • Sony A2770 | Operating Instructions - Page 64
    message being recorded through the base unit or cordless handset but the caller cannot hear you. Then, of the cordless handset. To answer the call Press (TALK) on the cordless handset. Recording is cordless handset. • You can also answer the call by picking up the handset on another phone if
  • Sony A2770 | Operating Instructions - Page 65
    , recording stops automatically. Tip If four minutes have passed in step 2, recording stops automatically, and the recorded memo is counted as a new message. Answering Machine Features Answering Machine Features 65US
  • Sony A2770 | Operating Instructions - Page 66
    phone. First, you just set the remote ID code (security code) and turn on the answering function before going out. The remote ID code (security code) setting can only be made on the cordless handset allow more than 60 seconds to elapse during the operation procedure. Tip When you select "(GO BACK)",
  • Sony A2770 | Operating Instructions - Page 67
    , enter the control code within 20 seconds (see the table below). To quit, hang up the phone. Answering Machine Features Control codes for remote operations To Play back messages Repeat the current message Skip the current message Erase the current message Erase all messages Record a new
  • Sony A2770 | Operating Instructions - Page 68
    display and the ringer sound will change to a higher tone from the second ring if you receive a call from a phone number which is stored in the Phone Directory on the cordless handset (see page 39). Note The memory match function does not work with "UNKNOWN NUMBER/ NAME/CALLER" or "BLOCKED NUMBER
  • Sony A2770 | Operating Instructions - Page 69
    not answered. Viewing the Caller ID list You can look through the Caller ID list on the cordless handset to check the phone number and/or name of the calls received. Turn Press 1 Turn Jog Dial. The display a message from the Caller ID list" on page 73. Caller ID Features continued Caller ID
  • Sony A2770 | Operating Instructions - Page 70
    but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want to Do not allow more than 60 seconds to elapse during the operation procedure. Tip When you select "(GO BACK)", you can return to the previous
  • Sony A2770 | Operating Instructions - Page 71
    made on the cordless handset. Note that Caller operation procedure. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset the procedure. * If the system includes additional cordless handsets, it is necessary to stop
  • Sony A2770 | Operating Instructions - Page 72
    allow more than 60 seconds to elapse during the operation procedure. • If the number displayed in step 1 cordless handset to make a call instead of doing steps 2 and 3. • If an access number of the long distance call is set up with the EZ access function, you can add the access number to the phone
  • Sony A2770 | Operating Instructions - Page 73
    Press (HOLD/PLAY) 1 Display the phone number you want to play back a operation procedure. Tips • When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. • Messages can be played back by pressing (HOLD/PLAY) on the cordless handset in step 1. Caller ID Features
  • Sony A2770 | Operating Instructions - Page 74
    Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 69). SMITH JOHN 1-201-123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF 2 Confirm the number and press Jog Dial. 3 Turn Jog Dial to choose "PROGRAM phone number. Enter or change the phone number
  • Sony A2770 | Operating Instructions - Page 75
    and you will not be able to store into the Phone Directory. Enter the area code (see page 17). • Do not allow more than 60 seconds to elapse during the operation procedure. • If the number displayed in step 1 is 123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF Caller ID Features continued Caller ID
  • Sony A2770 | Operating Instructions - Page 76
    MASSAGE RING OFF SMITH JOHN 123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF 2 Continue the operation to call or store the phone number with the correct number of digits (pages 72 and 74). Notes • You need to adjust the number of digits depending on the Caller ID data. 76US Caller ID Features
  • Sony A2770 | Operating Instructions - Page 77
    to "Caller ID with call waiting" as a single service. This is a new service that combines the two services. Even though you now have a "Caller ID with call waiting" compatible phone, unless you subscribe to the combined "Caller ID with call waiting" service, you will not be able to see the name
  • Sony A2770 | Operating Instructions - Page 78
    on the belt using the belt clip. Open the belt clip of the cordless handset by pressing the top of it, and then attach the cordless handset to the belt. Using the headset You can talk on the cordless handset without using your hands by connecting a headset (optional) to the I (HEADSET) jack on
  • Sony A2770 | Operating Instructions - Page 79
    • If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone
  • Sony A2770 | Operating Instructions - Page 80
    alcohol or benzine as they may damage the finish of the cabinet. • If the charge terminals of the base unit and cordless handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. 80US Additional Information
  • Sony A2770 | Operating Instructions - Page 81
    this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Making calls Symptom Remedy You hear five short error beeps when you press (TALK). • Make sure you have set up the base unit correctly (page 11). • Move the cordless handset
  • Sony A2770 | Operating Instructions - Page 82
    Troubleshooting (continued) Phone Directory Intercom Additional cordless handset Symptom Remedy You hear five short error beeps and "NO OTHER HANDSET REGISTERED" appears on the display. • You tried to transfer the Phone Directory memory although the system has no additional cordless handset.
  • Sony A2770 | Operating Instructions - Page 83
    Operating from an outside phone Symptom Remedy The phone does not accept your remote ID code (security code). • Make sure you call from a touch-tone phone to "Caller ID with call waiting" service (page 77). • Make sure nobody is talking with another phone on the same telephone line. You cannot
  • Sony A2770 | Operating Instructions - Page 84
    Troubleshooting (continued) Power source/battery Symptom Remedy The CHARGE lamp on the base • Wipe the charge terminals of the base unit, cordless unit does not light up when handset, and charger (supplied with the additional you place the cordless handset cordless handset) with a soft cloth
  • Sony A2770 | Operating Instructions - Page 85
    -Spectrum Access method FDMA-TDD Frequency band 2.4075 - 2.4720 GHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 10. Cordless handset Power source Rechargeable battery pack BP-T38 Battery life Standby: Approx. 6 days Talk: Approx. 5 hours
  • Sony A2770 | Operating Instructions - Page 86
    service 33, 38 Caller ID 68 Caller ID list 69 calling back 72 memory match function 68 playing back a message from the Caller ID list 73 storing in Phone Directory 74 Caller ID with call waiting 77 Carrying the cordless handset by the belt clip 78 Connection 12 Control codes for remote operations
  • Sony A2770 | Operating Instructions - Page 87
    Caller ID list into Phone Directory 74 Switching phones during a call 49 T Toll-saver feature 54 Talking between the phones 50 Tone dialing dialing mode 16 switching to 33 Transferring a call 51 Troubleshooting 81 U UNKNOWN NUMBER/ NAME/CALLER 68 V Volume answering 61 cordless handset 33, 38 ringer
  • Sony A2770 | Operating Instructions - Page 88
    For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.sony.com/productregistration Sony Corporation Printed in Taiwan, R.O.C.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
3-232-389-
12
(1)
©2001 Sony Corporation
Operating Instructions
SPP-A2770
Cordless
Telephone
with Answering System
US
Hearing-Aid Compatible