Sony A2770 Operating Instructions - Page 16
Choosing the dialing mode, Step 4
UPC - 027242585249
View all Sony A2770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 4 Choosing the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). Setting the dialing mode is only possible on the cordless handset. Make sure the base unit* is not in use before you start the setting. You cannot set the dialing mode while the system is in use. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. 1 Press (PGM). 2 Press (*TONE). You hear a confirmation beep. DIAL MODE 1:TONE 2:PULSE NEW OLD MASSAGE RING OFF 3 Press (1) for tone dialing or (2) for pulse dialing. You hear a long confirmation beep. If you aren't sure of your dialing system Make a trial call with the dialing mode set to TONE. If the call connects, leave the setting as is; otherwise, set to PULSE. Note Do not allow more than 60 seconds to elapse during the operation procedure. 16US Getting Started