Sony A2770 Operating Instructions - Page 17
Entering the area code, Step 5
UPC - 027242585249
View all Sony A2770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 5 Getting Started Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter the area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone must be able to select an area code to properly dial a call from the Caller ID list. Depending on your region, enter the 3-digit area code as follows: Case 1. If 7-digit dialing (no area code) is accepted for local calls in your area, see "To enter your home area code" below. If you live in an area where calls from or to other local areas can also be made by 10-digit dialing (area code + number), you can register up to 5 local area codes with this telephone to take advantage of this system. See "To enter the local area code (For 10 digits phone number users)" on page 19. Case 2. If 10-digit dialing (area code + number) is required for all local calls in your area, see "To enter the local area code (For 10 digits phone number users)" on page 19. Entering the area code is only possible on the cordless handset. Make sure the base unit* is not in use before you start the setting. You cannot set the dialing mode while the system is in use. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. To enter your home area code 1 Press (PGM). Turn Press 2 Turn Jog Dial to choose "AREA CODE", and then press Jog Dial. (GO BACK) HOME : LOCAL 1: NEW OLD MASSAGE RING OFF 3 Press Jog Dial again. "ENTER HOME AREA CODE" appears on the display. (ERASE) ENTER HOME AREA CODE _ NEW OLD MASSAGE RING OFF continued Getting Started 17US