Sony AITE260S Operating Instructions - Page 21
Periodic Cleaning Request Mode, Data Compression Control, set DIP switch 6 [Periodic
View all Sony AITE260S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Periodic Cleaning Request Mode To enable Periodic Cleaning Request Mode, set DIP switch 6 [Periodic Cleaning Req] to ON. ON OFF 12345678 The "CLEANING REQUEST" LED on the front panel lights after every 100 hours of operation. When this LED lights, clean the drive with a cleaning cartridge. Note To maintain the drive in optimum condition in environments affected by dust and other contaminants, we recommend keeping cleaning requests enabled. Data Compression Control Data compression can be selected by DIP switches. Data compression is enabled when DIP switch 7 [DC Control (1)] is ON. ON OFF 12345678 Control by host can be disabled when DIP switch 8 [DC Control (2)] is ON. ON OFF 12345678 21 Part 2. Preparation
Part 2.
Preparation
21
Periodic Cleaning Request Mode
To enable Periodic Cleaning Request Mode, set DIP switch 6 [Periodic
Cleaning Req] to ON.
ON
OFF
1
2
3
4
5
6
7
8
The “CLEANING REQUEST” LED on the front panel lights after every 100
hours of operation.
When this LED lights, clean the drive with a cleaning cartridge.
Note
To maintain the drive in optimum condition in environments affected by dust
and other contaminants, we recommend keeping cleaning requests enabled.
Data Compression Control
Data compression can be selected by DIP switches.
Data compression is enabled when DIP switch 7 [DC Control (1)] is ON.
ON
OFF
1
2
3
4
5
6
7
8
Control by host can be disabled when DIP switch 8 [DC Control (2)] is ON.
ON
OFF
1
2
3
4
5
6
7
8