Sony BDV-N790W Operating Instructions - Page 20
Step 4: Setting up the Wireless System - instruction manual
View all Sony BDV-N790W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started • If security is set on your wireless network, the security key (WEP key, WPA key)**. * SSID (Service Set Identifier) is a name that identifies a particular wireless network. ** You need to check the settings of your wireless LAN router to get the information about SSID and security key. For details: - visit the following website: http://www.sony.com/blurayhtsupport/ - refer to the instruction manual supplied with the wireless LAN router - consult the manufacturer of the wireless LAN router About wireless LAN security Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this system supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment. x No Security Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data. x WEP WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices which do not support TKIP/AES to be connected. x WPA-PSK (TKIP), WPA2-PSK (TKIP) TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP. x WPA-PSK (AES), WPA2-PSK (AES) AES is a security technology that uses an advanced security method distinct from WEP and TKIP. AES assures a higher security level than WEP or TKIP. Step 4: Setting up the Wireless System The unit transmits sound to the surround amplifier that is connected to the surround speakers. To activate wireless transmission, perform the following Steps. 1 Insert the wireless transceiver into the unit. Rear panel of the unit Wireless transceiver 2 Insert the wireless transceiver into the surround amplifier. Rear panel of the surround amplifier EZW-RT50 Wireless transceiver 3 Connect the AC power cord (mains lead) of the unit. Before connecting the AC power cord, make sure all connections in "Step 2: Connecting the System" (page 14) are secure. 20US