Sony BM850T2 Operating Instructions - Page 17

Telephone Recording To record telephone conversation, connect the optional TL-4 telephone recording adaptor* to the TELEPHONE PICKUP jack. For further details, refer to the instruction manual of the telephone recording adaptor. * The TL-4 cannot be used on some telephones. 1 REC/ERASE 3 Telephone BM-850 TL-4 (not supplied) Rear to TELEPHONE PICKUP 5 2 4 p STOP At the beginning of telephone recording LTR signal is automatically recorded for about 3 seconds and the telephone recording begins at the same time. While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though the STOP button is pressed. During telephone recording Only the LTR, SEC and STOP buttons are operative. Note If the TEL REC button is pressed when the telephone recording adaptor, etc. is not connected, the beep tone will be heard and the recording will not start. 1 Connect the TL-4 (not supplied) to the unit. 2 Set POWER to ON. 3 Insert a cassette. (See page 7.) 4 Set TAPE SPEED to the desired tape speed. 5 Keep TEL REC pressed for more than a second. Telephone recording begins. REC/ERASE lamp blinks and ( appears on the display window. To stop the tape Press p STOP. Operations 17