Sony BRCH900 Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 1

As of May 8, 2012 BRU-SF10 1. Single mode fiber cable supported The BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum. 2. Status display on the front panel The following various status displays are newly added on the front panel of the BRU-SF10 to increase its usability. - 1080i/720p, 59.94/50, RS-232C/422, 9600/38400bps - Camera ID : 1~7 3. Monitor output By inserting the BRBK-HSD2, the HD/SD-SDI output card into optional card slot, the BRU-SF10 enables monitor output. By terming off data mix, it enables various camera settings without displaying OSD on video out signal (main line). 4. Uncompressed digital transmission The BRU-SF10 features uncompressed multiple signal operation via a single cable. Video, sync, pan/tilt control, camera control signal and audio line-in signal can be transmitted using with the CCFC-S200, single mode optical fiber cable and the BRBK-SF1, HD optical multiplex card. The distance between the BRU-SF10 and the BRC-Z330/-H900 can be extended to a maximum 2,000m (6,560 feet). The Single cable operation makes it possible to integrate the camera system easily. 5. Variety of video signal output The BRU-SF10 is equipped with analog RGB or Y/Pb/Pr signal output as standard. Furthermore, 2 built-in optional - 1 -