Sony BRCH900 Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 3
Brbk-hsd2, Brbk-sf1, Ccfc-s200
View all Sony BRCH900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
BRBK-HSD2 HD/SD-SDI output card The BRBK-HSD2 provides HD-SDI signal when installed into the BRU-SF10 built-in card slot. By turning off data mix, it enables various camera settings without displaying OSD on video out signal (main line). This can be used as an optional card for the BRC-Z330*/-H900. Note 1: Although the BRBK-HSD2 can be used with the BRC-Z330/1, in case of using with previous version of the BRC-Z330, it requires version upgrade. BRBK-SF1 1. HD optical multiplex card The BRBK-SF1 provides high quality optical multiplex HD signal and audio line-in signal when installed into the BRC-Z330* /-H900 built-in card slot. Note: Although the BRBK-SF1 can be used with the BRC-Z330/1, in case of using with previous version of the BRC-Z330, it requires version upgrade. 2. Audio line input The BRBK-SF1 is equipped with phono jack for Audio input. By installing the BRBK-SF1 into the BRC-Z330/-H900, image signal of the BRC-Z330/-H900 and analog audio signal received by the BRBK-SF1 can be simultaneously transferred to the BRU-SF10 via single mode optical fiber cable. This is effective when a microphone is set near the BRC-Z330/-H900 located in distant place while the BRU-SF10 located by an operator who needs both image and audio at the same time. CCFC-S200 Single mode optical fiber cable The CCFC-S200 is a single mode optical fiber cable for connecting the BRC-Z330/-H900 (with BRBK-SF1) to the BRU-SF10. The CCFC-S200 can transmit uncompressed digital data without any deterioration. It can be extended up to 2000m (6,560 feet) using with supplied cable extension adaptor. - 3 -