Sony BRCH900 Specification Sheet (CCFC-S200 & BRU-SF10 Specification) - Page 2

card slots enable to provide various signals in order to broaden the range of applications. For instance, HD-SDI signal can be provided when installing the BRBK-HSD2 into the card slot. Two same kinds of cards can be installed into the BRU-SF10 at the same time. 6. External sync signal input/output equipped When multiple BRC-Z330 or BRC-H900 HD cameras or combination of BRC-Z330 and BRC-H900 HD cameras are connected via the Optical Fiber Cable, the video signal can be synchronized by inputting the sync signal into the external sync input connector. 7. Audio line output connectors (phono jacks, L/R) equipped The BRU-SF10 allows output of stereo audio line signals that are transmitted from the BRBK-SF1 HD Optical Multiplex Card inserted into the BRC-Z330/-H900 HD camera. 8. RS-232C/RS-422 serial control by VISCA™ All of camera and pan/tilt functions can be controlled via VISCA commands with a remote controller or a PC. This unit incorporates the VISCA Mini DIN 8pin connectors for RS-232C control between BRU-SF10 and BRC-Z330/-H900. Additionally, the dedicated 9pin connector is incorporated for RS-422 control from far location. While the RS-232C is extended up to 15m (50feet) officially, the RS-422 is up to approximately 1.2km (4,000feet). The data transmission speed of the RS-422 and the RS-232C can be selected either 9600bps or 38400bps. BRBK-SA1 Analog SD output card The BRBK-SA1 enables down convert to analog SD output signal when installed into the BRU-SF10 built-in card slot. This can be used as an optional card for the BRC-Z330/-H900*. *Note: Although the BRBK-SA1 can be used with the BRC-Z330/1, in case of using with previous version of the BRC-Z330, it requires version upgrade. - 2 -