Sony CCD TRV37 Operating Instructions - Page 10
Charging the battery pack, Set the POWER switch to OFF CHARGE. Charging begins. The remaining - power cord
UPC - 027242564848
View all Sony CCD TRV37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 1 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the "InfoLITHIUM" battery pack (L series). (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack with the plug's v mark facing up. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. (4) Set the POWER switch to OFF (CHARGE). Charging begins. The remaining battery time is indicated in minutes on the display window. When the remaining battery indicator changes to u, normal charge is completed. To fully charge the battery (full charge), leave the battery pack attached for about 1 hour after normal charge is completed until FULL appears in the display window. Fully charging the battery allows you to use the battery longer than usual. POWER 4 CAMERA OFF (CHARGE) VTR 1 2 10