Sony CCD TRV37 Operating Instructions - Page 69

Troubleshooting, Others

Page 69 highlights

Troubleshooting Symptom Cause and/or Corrective Actions The battery pack is quickly discharged. • The operating temperature is too low. • The battery pack is not fully charged. c Charge the battery pack again. (p. 10) • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 9) The battery remaining indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 9) • The battery is dead. c Use a charged battery pack. (p. 9, 10) The power goes off although the battery remaining indicator indicates that the battery pack has enough power to operate. c Charge the battery pack fully again so that the indication on the battery remaining indicator is correct. The cassette cannot be removed from the holder. • The power source is disconnected. c Connect it firmly. (p. 9, 14) • The battery is dead. c Use a charged battery pack. (p. 9, 10) The % and Z indicators flash and no • Moisture condensation has occurred. functions except for cassette ejection c Remove the cassette and leave your camcorder for at work. least 1 hour to acclimatize. (p. 73) Additional Information Others Symptom Cause and/or Corrective Actions The Remote Commander supplied with your camcorder does not work. (CCD-TRV57/TRV67/TRV87 only) • COMMANDER is set to OFF in the menu settings. c Set it to ON. (p. 55) • Something is blocking the infrared rays. c Remove the obstacle. • The batteries inserted in the battery holder with the + - polarities incorrectly matching the + - marks. c Insert the batteries with the correct polarity. (p. 84) • The batteries are dead. c Insert new ones. (p. 84) The date or time indicator does not • Reset the date and time. (p. 61) appear, and the bars "--:--:--" appear. The picture from a TV or VCR does not appear even when your camcorder is connected to outputs on the TV or VCR. (CCD-TRV87 only) • DISPLAY is set to V-OUT/LCD in the menu settings. c Set it to LCD. (p. 55) The melody or beep sounds for 5 seconds. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimatize. (p. 73) • Some troubles has occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. While charging the battery pack, no • The AC power adaptor is disconnected. indicator appears or the indicator c Connect it firmly. (p. 10) flashes in the display window. • Something is wrong with the battery pack. c Contact your Sony dealer or local authorized Sony service facility. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

69
Additional Information
Troubleshooting
Symptom
Cause and/or Corrective Actions
• The operating temperature is too low.
• The battery pack is not fully charged.
c
Charge the battery pack again. (p. 10)
• The battery pack is completely dead, and cannot be
recharged.
c
Replace with a new battery pack. (p. 9)
• You have used the battery pack in an extremely hot or
cold environment for a long time.
• The battery pack is completely dead, and cannot be
recharged.
c
Replace with a new battery pack. (p. 9)
• The battery is dead.
c
Use a charged battery pack. (p. 9, 10)
c
Charge the battery pack fully again so that the indication
on the battery remaining indicator is correct.
• The power source is disconnected.
c
Connect it firmly. (p. 9, 14)
• The battery is dead.
c
Use a charged battery pack. (p. 9, 10)
• Moisture condensation has occurred.
c
Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 73)
Others
Symptom
Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c
Set it to ON. (p. 55)
• Something is blocking the infrared rays.
c
Remove the obstacle.
• The batteries inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c
Insert the batteries with the correct polarity. (p. 84)
• The batteries are dead.
c
Insert new ones. (p. 84)
• Reset the date and time. (p. 61)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c
Set it to LCD. (p. 55)
• Moisture condensation has occurred.
c
Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 73)
• Some troubles has occurred in your camcorder.
c
Remove the cassette and insert it again, then operate
your camcorder.
• The AC power adaptor is disconnected.
c
Connect it firmly. (p. 10)
• Something is wrong with the battery pack.
c
Contact your Sony dealer or local authorized Sony
service facility.
The
%
and
Z
indicators flash and no
functions except for cassette ejection
work.
The cassette cannot be removed from
the holder.
The Remote Commander supplied
with your camcorder does not work.
(CCD-TRV57/TRV67/TRV87 only)
The melody or beep sounds for
5 seconds.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR. (CCD-TRV87 only)
The battery pack is quickly
discharged.
The battery remaining indicator
does not indicate the correct
time.
The date or time indicator does not
appear, and the bars “--:--:--” appear.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
The power goes off although the
battery remaining indicator indicates
that the battery pack has enough
power to operate.