Sony CCD-TRV43 Operating Instructions - Page 48

Optimizing the recording condition

Get Sony CCD-TRV43 - Handycam Hi8 Camcorder PDF manuals and user guides
UPC - 027242550872
View all Sony CCD-TRV43 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Optimizing the recording condition Use this feature to check the tape condition before recording, so that you can get the best possible picture (ORC). (1) While the camcorder is in Standby mode, press MENU to display the menu. (2) Turn the control dial to select Ò, then press the dial. (3) Turn the control dial to select ORC TO SET, then press the dial. "START/STOP KEY" flashes. (4) Press START/STOP. The camcorder takes about 5 - 10 seconds to check the tape condition and then returns to Standby mode. 1 MENU 2 TAPE SET REC MODE ORC TO SET REMAIN TAPE SET REC MODE SP ORC TO SET REMAIN RETURN 3 TAPE SET REC MODE ORC TO SET REMAIN RETURN STA 4 LOCK NDBY START/STOP ORC START/STOP KEY STBY 0:00:00 Each time you insert the cassette Perform the above procedures. Notes on the ORC function •When you set ORC TO SET, the recording on the tape is erased for about 0.1 second so that the camcorder can check the tape condition. Be careful when you use a recorded tape. The 0.1 second blank is erased if you record from the point where you set ORC TO SET for more than 2 seconds, or if you record over the blank. •You cannot use this function on a tape with the red mark on the cassette exposed. •ORC stands for "Optimizing the Recording Condition." 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
48
Use this feature to check the tape condition before recording, so that you can get the
best possible picture (ORC).
(
1
)
While the camcorder is in Standby mode, press MENU to display the menu.
(
2
)
Turn the control dial to select
Ò
, then press the dial.
(
3
)
Turn the control dial to select ORC TO SET, then press the dial.
“START/STOP KEY” flashes.
(
4
)
Press START/STOP.
The camcorder takes about 5 – 10 seconds to check the tape condition and then
returns to Standby mode.
Each time you insert the cassette
Perform the above procedures.
Notes on the ORC function
•When you set ORC TO SET, the recording on the tape is erased for about 0.1 second so
that the camcorder can check the tape condition. Be careful when you use a recorded
tape. The 0.1 second blank is erased if you record from the point where you set ORC
TO SET for more than 2 seconds, or if you record over the blank.
•You cannot use this function on a tape with the red mark on the cassette exposed.
•ORC stands for “Optimizing the Recording Condition.”
Optimizing the recording condition
1
4
STBY
0:00:00
ORC
MENU
L
O
C
K
START/STOP
S
T
A
N
D
B
Y
START/STOP
KEY
3
TAPE
SET
REC
MODE
ORC
TO
SET
REMAIN
RETURN
TAPE
SET
REC
MODE
ORC
TO
SET
REMAIN
RETURN
SP
TAPE
SET
REC
MODE
ORC
TO
SET
REMAIN
2