Sony CDP-M333ES Operating Instructions - Page 32

Using the Player with Another Component Loading the Disc Names of the second CD player If the second CD player has the Disc Name function (see page 20), you can load the Disc Names of the second CD player into this player's memory and display them on this player. 1 Press MENU/NO. 2 Turn the JOG dial until "LOAD 2ndNAME?" flashes in the display. 2nd NEXT DISC ART. HIT TRACK GROUP ART. MIN STEP SEC LOAD*2ndNAME? ALL 1 DISCS SHUFFLE REPEAT 1 GROUP PROGRAM 1 2 3 X-FADE DELETE MULTI CD TEXT NO DELAY CD1 CD2 CD3 3 Push the JOG dial. This player starts loading. (Loading takes about one minute.) Labeling discs of the second CD player You can label discs of the second CD player or change the Disc Names loaded from the second CD player. Playing Alternately (No-Delay Play/X-Fade Play) When you connect a second player, you can play tracks in this player and those from the second player alternately from any play mode (see "Connecting another CD player" on page 6). Select one of the following methods: • No-Delay Play: The current player changes at each track. Each time the current player changes to the other player, the other player starts play without a break in sound immediately after the current player ends play. The other player skips the lead-in portion and starts playing from where the sound actually begins. • X-Fade Play: The current player changes at each track or at the specified interval. You can select the interval, 30, 60, or 90 seconds. Each time the current player changes to the other player, the sound from both players is mixed. The current player ends play by fading out, and the other player starts play by fading in. X-FADE NO DELAY 1 Press MEGA CONTROL. The MEGA CONTROL button lights up. 2 Turn the JOG dial to select the disc you want to assign a Disc Name to. If the disc slot you select does not contain a disc, "NO DISC" appears in the display and you cannot assign a Disc Name. 3 Press MENU/NO. "NAME IN?" appears. 4 Push the JOG dial. 5 Input the new Disc Name following the procedure in "Labeling discs (Disc Name)" on page 20. Note The new Disc Names are stored on this player's memory, so you cannot display them on the second CD player. I / 1 H 1 Select the desired disc and play mode for each player. 2 When you select No-Delay Play Press NO DELAY. "NO DELAY" appears in the display. When you select X-Fade Play Press X-FADE. "X-FADE" appears in the display. Each time you press the X-FADE button, the indication appears as follows: tX-FADE off t at track end t after 30 sec after 90 sec T after 60 sec T To change the current player each time a whole track is finished, select "at track end." To change the current player at the specified interval, press X-FADE repeatedly until the interval you want appears in the display. 32