Sony CMT-LS1 Operating Instructions - Page 9

Getting Started Step 2: Setting the time You must set the time before you can use the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24 hour system model is used for illustration purposes. Set the time before turning on the power. 2,3 123 456 7 8 9 10/0 >10 + NX x - -+ .> mM + - 1 2,3 3 Press +/- to set the minute then press ENTER. The clock starts. To change the time You can change the preset time while the power is on. 1 Press CLOCK/TIMER SET. 2 Press +/- repeatedly until "SET CLOCK" appears then press ENTER. 3 Repeat steps 2 and 3 of "Setting the time". Tips • If you have made a mistake, start again from step 1. • The built-in clock shows the time in the display while the power is off. • The upper dot flashes for the first half of a minute (0 to 29 seconds), and the lower dot flashes for the last half of a minute (30 to 59 seconds). 1 Press CLOCK/TIMER SET while the power is off. The hour indication flashes. 2 Press +/- to set the hour then press ENTER. The minute indication flashes. 9