Sony CSS-HD2 Operating Instructions - Page 12

Set up Preparing the Cyber-shot Station 1 Select a station plate. The station plates have a front side and bottom side. Front side Using a right-sliding station plate (such as HD2-A) Using a left-sliding station plate (such as HD2-B) Bottom side Sony logo Plate name Select the station plate corresponding with your camera. Model name Plate name Sliding direction DSC-T300 HD2-A Right DSC-W110 DSC-W115 DSC-W120 HD2-B Left DSC-W125 DSC-W130 DSC-W150 HD2-C Left DSC-W170 DSC-W300 HD2-D Left DSC-T2 DSC-T70 HD2-E Right DSC-T75 2 Attach the station plate.  Hold the station plate on the front side (the side with the Sony logo) facing you, and place it on the I/O unit of the Cyber-shot Station as if you place it over the protection cover attached on the I/O unit.  Hold the Cyber-shot Station with one hand. Hold the camera side guide of the station plate with the other hand and slide the station plate until it is pushed in all the way.  See the table in step 1 for the sliding direction. Sliding to the right Sliding to the left 12-GB