Sony CX20 Operating Instructions - Page 25
The Function Menu
View all Sony CX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
The Function Menu The Function menu is used for changing the settings of the projector. Adjustments and Settings Using a Menu Setting items Smart APA Auto Input Search Auto Focus Test Pattern Standby Mode Power Saving Functions Initial setting The APA (Auto Pixel Alignment) automatically On adjusts "Dot Phase," "H Size" and "Shift" on the Signal menu for the input signal from a computer. • On: When a signal is input from a computer, the APA functions automatically so that the picture can be seen clearly. Once the specified input signal has been adjusted by the "Smart APA," it will not be readjusted even when the cable is disconnected and connected again or the input channel is changed. You can adjust the picture by pressing the APA key on the Remote Commander even if "Smart APA" set to "On." • Off: The APA functions when you press the APA key on the Remote Commander. When set to "On," the projector detects input signals in Off the following order: Input-A/Video/S-Video. It indicates the input channel when the INPUT key is pressed. When set to "Off," the focus adjustment does not work On automatically when the projector is turned on or when the AUTO FOCUS key on the projector or the remote commander is pressed. When set to "On," a test pattern is displayed on the Off screen during "Lens Zoom", "Lens Focus," or "V Keystone" adjustment. When set to "Low", the power consumption is set to Standard low in standby mode. When set to "On," the projector goes into power saving Off mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. The power saving mode is canceled when a signal is input or any key is pressed. In power saving mode, no keys function for the first 45 seconds after the lamp goes out. The Function Menu 25