Sony CX20 Operating Instructions - Page 9
Connecting the Projector, Connecting a Computer - vpl
View all Sony CX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Projecting the Picture Connecting the Projector To connect a computer Left side When you connect the projector, make sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out by the plug, not the cable itself. Connecting a Computer This section describes how to connect the projector to a computer. For more information, refer to the computer's instruction manual. White to audio output (L) Red to audio output (R) to monitor output Computer A HD D-sub 15-pin cable (supplied) B A/V connecting adaptor (supplied) C Audio cable (not supplied) (Connect only when you want to output the audio from the speaker of the projector.) Notes • The projector accepts VGA, SVGA, XGA, SXGA, and SXGA+ signals. However, we recommend that you set the output mode of your computer to XGA (VPL-CX20) or Connecting the Projector 9