Home » Sony Manuals » Home Theater Systems » Sony DAV-HDX587WC » Manual Viewer

Sony DAV-HDX587WC Operating Instructions - Page 39

Checking the audio signal format, Selecting a playback area for a Super Audio CD

UPC - 027242753471

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Disc x Super VCD • [1:STEREO]: The stereo sound of audio track 1. • [1:1/L]: The sound of the left channel of audio track 1 (monaural). • [1:2/R]: The sound of the right channel of audio track 1 (monaural). • [2:STEREO]: The stereo sound of audio track 2. • [2:1/L]: The sound of the left channel of audio track 2 (monaural). • [2:2/R]: The sound of the right channel of audio track 2 (monaural). Checking the audio signal format If you press AUDIO repeatedly during playback, the format of the current audio signal (PCM, Dolby Digital, DTS, etc.) appears as shown below. Example: Dolby Digital 5.1 channel Surround (L/R) LFE (Low Frequency Effect) 1: ENGLISH DOLBY DIGITAL 3 / 2 .1 Front (L/R) + Center LCR LFE LS RS Currently playing program format Example: Dolby Digital 3 channel Front (L/R) Surround (Monaural) 1:SPANISH DOLBY DIGITAL 2 / 1 L R S Currently playing program format Selecting a playback area for a Super Audio CD Some Super Audio CDs consist of a 2 channel playback area and a multi-channel playback area. You can select the playback area you want to listen to. 1 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 2 Press X/x to select 2CH], then press . [MULTI/ The options for [MULTI/2CH] appear. 3 Press X/x to select the desired setting and press . • [MULTI]: You can play the multi-channel playback area. • [2CH]: You can play the 2 channel playback area. Note • When the Super Audio CD does not have a multichannel playback area, you cannot select the playback area. Changing a playback layer for a hybrid Super Audio CD Some Super Audio CDs consist of a Super Audio CD layer and a CD layer. You can change the playback layer you want to listen to. 1 Press DISPLAY while the system is in stop mode. The Control Menu display appears on the TV screen. 2 Press X/x to select [SUPER AUDIO CD/CD LAYER], then press . x When the current layer is the CD layer [SUPER AUDIO CD] appears. 39US

Section	Page
WARNING	2
About These Operating Instructions	4
About the S-AIR function	5
Playable Discs	7
Example of discs that the system cannot play	8
Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW	8
About Multi Session CD	8
Region code	9
Note about playback operations of a DVD or VIDEO CD	9
Getting Started	10
Unpacking	10
Step 1: Installing the System	12
Positioning the system	12
Assembling the speakers	14
Installing the speakers on a wall	19
Step 2: Connecting the System	21
Connecting the speakers	21
Connecting the TV (Video connection)	22
Connecting the TV (Audio connection)	23
Connecting the other components	24
Connecting the antenna (aerial)	26
Inserting the wireless transceiver	27
Connecting the AC power cords (mains leads)	28
About the demonstration	28
Step 3: Performing the Quick Setup	29
Setting the type of video output to match your TV	31
Step 4: Selecting the Source	32
Step 5: Enjoying Surround Sound	33
Enjoying TV sound with the 5.1 channel surround sound effect	33
Selecting surround sound effects based on your listening preference	33
Disc	36
Playing a Disc	36
Displaying multi-angles and subtitles	38
Changing the sound	38
Checking the audio signal format	39
Selecting a playback area for a Super Audio CD	39
Changing a playback layer for a hybrid Super Audio CD	39
Playing a VIDEO CD with PBC functions (Ver. 2.0)	40
Resuming playback from the point where you stopped the disc	40
Using Play Mode	41
Creating your own program	41
Playing in random order	42
Playing repeatedly	43
Searching/Selecting Disc Contents	44
Using the DVD’s menu	44
Selecting an original title or edited title on a DVD-VR	44
Searching for a title/chapter/ track/scene, etc.	44
Playing MP3 Files/JPEG Image Files	46
Selecting an MP3 file or folder	46
Selecting a JPEG image file or folder	47
Playing a slide show with sound	48
Selecting the slide show duration of JPEG image files	48
Selecting an effect for JPEG image files in the slide show	49
Selecting playback priority of the file type	49
Displaying a list of MP3 files/ JPEG image files	49
Adjusting the Delay Between the Picture and Sound	50
Restricting Playback of the Disc	50
Changing the password	51
Changing the System Settings by Using the Setup Display	52
Setting the display or sound track language	53
Settings for the display	53
Settings for HDMI	55
Settings for the audio	56
Other Settings	57
Settings for the speakers	57
Tuner	60
Presetting Radio Stations	60
Listening to the Radio	61
Naming preset stations	61
Viewing the station name or frequency in the front panel display	62
Control for HDMI/External Audio Device	63
Using the Control for HDMI Function for “BRAVIA” Sync	63
Preparing the Control for HDMI function	63
Using the Theater Mode	64
Watching a DVD by a single button press	64
Turning the system off in sync with the TV	64
Enjoying TV sound from the speakers by this system	64
Setting the Maximum Volume Level of the System	65
Changing the language for the on-screen display of the TV	65
Using the DIGITAL MEDIA PORT Adapter	65
Playing the connected component on the system	65
Using an S-AIR Product	66
Establishing sound transmission between the unit and S-AIR sub unit (ID setting)	67
Enjoying the system’s sound in another room	67
Enjoying the S-AIR receiver while the unit is in standby mode	68
Identifying the unit with a specific S-AIR sub unit (Pairing operation)	69
If sound transmission is unstable	70
Changing the RF output power	70
Other Operations	71
Getting Optimal Surround Sound for a Room	71
Calibrating the Appropriate Settings Automatically	72
Controlling the TV with the Supplied Remote	73
Using the Sound Effect	74
Reinforcing bass frequencies	74
Enjoying the sound at low volume	74
Enhancing compressed sound	74
Selecting the Effect to Suit the Source	75
Enjoying Multiplex Broadcast Sound	75
Changing the Input Level of the Sound from Connected Components	76
Using the Sleep Timer	76
Changing the Brightness of the Front Panel Display	77
Viewing Information About the Disc	77
Viewing the playing time and remaining time in the front panel display	77
Viewing the playing time and remaining time on the TV screen	78
Checking the play information of the disc	78
Checking the date information of a JPEG image file	79
Returning to the Default Settings	79
Returning the system parameters, such as preset stations, to the default settings	79
Returning the [SETUP] settings to the default	79
Additional Information	81
Precautions	81
Notes about the Discs	82
Troubleshooting	83
Self-diagnosis Function	89
Specifications	90
Glossary	92
Playback priority of file types	94
Language Code List	95
Parental Control Area Code List	95
Index to Parts and Control	96
Front panel	96
Rear panel	97
Front panel display	98
Remote control	99
Guide to the Control Menu Display	100
Control Menu display	100

Match case Limit results 1 per page

Disc

Super VCD

• [1:STEREO]

: The stereo sound of audio track

•

[1:1/L]: The sound of the left channel of audio

track 1 (monaural).

• [1:2/R]: The sound of the right channel of

audio track 1 (monaural).

• [2:STEREO]: The stereo sound of audio track

•

[2:1/L]: The sound of the left channel of audio

track 2 (monaural).

• [2:2/R]: The sound of the right channel of

audio track 2 (monaural).

If you press AUDIO repeatedly during

playback, the format of the current audio signal

(PCM, Dolby Digital, DTS, etc.) appears as

shown below.

Example:

Dolby Digital 5.1 channel

Example:

Dolby Digital 3 channel

Some Super Audio CDs consist of a 2 channel

playback area and a multi-channel playback

area. You can select the playback area you want

to listen to.

Press

DISPLAY while the system is

in stop mode.

The Control Menu display appears on the

TV screen.

Press

to select

[MULTI/

2CH], then press

The options for [MULTI/2CH] appear.

Press

to select the desired setting

and press

•

[MULTI]: You can play the multi-channel

playback area.

• [2CH]: You can play the 2 channel

playback area.

Note

• When the Super Audio CD does not have a multi-

channel playback area, you cannot select the

playback area.

Some Super Audio CDs consist of a Super

Audio CD layer and a CD layer. You can change

the playback layer you want to listen to.

Press

DISPLAY while the system is

in stop mode.

The Control Menu display appears on the

TV screen.

Press

to select

[SUPER

AUDIO CD/CD LAYER], then press

When the current layer is the CD

layer

[SUPER AUDIO CD] appears.

Checking the audio signal

format

1: ENGLISH

DOLBY DIGITAL

3 / 2 .1

LFE

Surround (L/R)

Front (L/R) +

Center

LFE (Low

Frequency Effect)

Currently playing program format

1:SPANISH

DOLBY DIGITAL

2 / 1

Front (L/R)

Surround

(Monaural)

Currently playing program format

Selecting a playback area for a

Super Audio CD

Changing a playback layer for

a hybrid Super Audio CD