Sony DAV-HDX587WC Operating Instructions - Page 69
Identifying the unit with a specific S-AIR sub unit (Pairing operation
UPC - 027242753471
View all Sony DAV-HDX587WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Note • When you turn the system off while "S-AIR STBY" is set to "STBY ON," "S-AIR" flashes (when sound transmission between the unit and S-AIR receiver is not established), or lights up (when sound transmission between the unit and S-AIR receiver is established) in the front panel display. Identifying the unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier For the S-AIR receiver It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system's sound if IDs are the same, or you may receive sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation. x Before pairing Sound transmission is established by ID (example). Your room This unit Neighbor ID A ID A S-AIR sub unit ID A S-AIR sub unit x After pairing Sound transmission is established between the paired unit and S-AIR sub unit(s) only. Your room Neighbor This unit ID A No transmission Control for HDMI/External Audio Device ID A S-AIR sub unit ID A S-AIR sub unit Pairing To perform pairing 1 Place the S-AIR sub unit that you want to pair near the unit. Note • Remove headphones from the surround amplifier (if connected). 2 Match the IDs of the unit and the S-AIR sub unit. • To set the ID of the unit, see "To set the ID of the unit" (page 67). • To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. • To set the ID of the surround amplifier, refer to the operating instructions of the surround amplifier. 3 Press SYSTEM MENU. 4 Press X/x repeatedly until "PAIRING" appears in the front panel display, then press or c. 5 After "START" appears in the front panel display, press . The unit starts pairing and "SEARCH" flashes in the front panel display. To cancel pairing, press SYSTEM MENU. 6 Start pairing of the S-AIR sub unit. x For the surround amplifier Refer to the operating instructions of the surround amplifier. 69US