Home » Sony Manuals » Home Theater Systems » Sony DAV-HDX587WC » Manual Viewer

Sony DAV-HDX587WC Operating Instructions - Page 68

Enjoying the S-AIR receiver while the unit is in standby mode, For the S-AIR receiver

UPC - 027242753471

Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

3 Press X/x to select the desired setting. • "PARTY": The S-AIR receiver outputs sound according to functions set on the unit. • "SEPARATE": You can set the desired function for the S-AIR receiver while unit functions do not change. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. 6 Select the desired function on the S-AIR receiver. x When "PARTY" is set The S-AIR receiver's function changes sequentially as you press FUNCTION +/- of the main unit (page 32) or S-AIR CH of the S-AIR receiver. x When "SEPARATE" is set The S-AIR receiver's function changes by pressing S-AIR CH of the S-AIR receiver as follows. "MAIN UNIT" t "TUNER FM" t "TUNER AM" t "DMPORT" t "AUDIO" t ... To enjoy the same function as the unit, select "MAIN UNIT." When "TUNER FM" or "TUNER AM" is selected on the unit, you can only select the same band for the tuner on the S-AIR receiver. In this case, when you select other than "TUNER FM" or "TUNER AM" on the unit, you can select any band for the tuner on the S-AIR receiver. 7 Adjust the volume on the S-AIR receiver. Note • When the sound is other than 2 channel stereo, multichannel sound is downmixed to 2 channel. To set "S-AIR MODE" via the remote Press S-AIR MODE. The S-AIR mode appears in the front panel display. Each time you press S-AIR MODE, the S-AIR mode changes. To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press H, X, x, ./> S-AIR CH Operation Share the same operations on the remote and unit. Change the function of the system. For details, refer to the operating instructions of the S-AIR receiver. Enjoying the S-AIR receiver while the unit is in standby mode For the S-AIR receiver You can enjoy the S-AIR receiver while the unit is in standby mode by setting "S-AIR STBY" to "STBY ON." 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "S-AIR STBY" appears in the front panel display, then press or c. 3 Press X/x to select the desired setting. • "STBY ON": You can enjoy the S-AIR receiver while the unit is in standby mode or turned on. The power consumption during the standby mode increases. • "STBY OFF": You cannot enjoy the S-AIR receiver while the unit is in standby mode. The default setting differs depending on the area. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. 68US

Section	Page
WARNING	2
About These Operating Instructions	4
About the S-AIR function	5
Playable Discs	7
Example of discs that the system cannot play	8
Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW	8
About Multi Session CD	8
Region code	9
Note about playback operations of a DVD or VIDEO CD	9
Getting Started	10
Unpacking	10
Step 1: Installing the System	12
Positioning the system	12
Assembling the speakers	14
Installing the speakers on a wall	19
Step 2: Connecting the System	21
Connecting the speakers	21
Connecting the TV (Video connection)	22
Connecting the TV (Audio connection)	23
Connecting the other components	24
Connecting the antenna (aerial)	26
Inserting the wireless transceiver	27
Connecting the AC power cords (mains leads)	28
About the demonstration	28
Step 3: Performing the Quick Setup	29
Setting the type of video output to match your TV	31
Step 4: Selecting the Source	32
Step 5: Enjoying Surround Sound	33
Enjoying TV sound with the 5.1 channel surround sound effect	33
Selecting surround sound effects based on your listening preference	33
Disc	36
Playing a Disc	36
Displaying multi-angles and subtitles	38
Changing the sound	38
Checking the audio signal format	39
Selecting a playback area for a Super Audio CD	39
Changing a playback layer for a hybrid Super Audio CD	39
Playing a VIDEO CD with PBC functions (Ver. 2.0)	40
Resuming playback from the point where you stopped the disc	40
Using Play Mode	41
Creating your own program	41
Playing in random order	42
Playing repeatedly	43
Searching/Selecting Disc Contents	44
Using the DVD’s menu	44
Selecting an original title or edited title on a DVD-VR	44
Searching for a title/chapter/ track/scene, etc.	44
Playing MP3 Files/JPEG Image Files	46
Selecting an MP3 file or folder	46
Selecting a JPEG image file or folder	47
Playing a slide show with sound	48
Selecting the slide show duration of JPEG image files	48
Selecting an effect for JPEG image files in the slide show	49
Selecting playback priority of the file type	49
Displaying a list of MP3 files/ JPEG image files	49
Adjusting the Delay Between the Picture and Sound	50
Restricting Playback of the Disc	50
Changing the password	51
Changing the System Settings by Using the Setup Display	52
Setting the display or sound track language	53
Settings for the display	53
Settings for HDMI	55
Settings for the audio	56
Other Settings	57
Settings for the speakers	57
Tuner	60
Presetting Radio Stations	60
Listening to the Radio	61
Naming preset stations	61
Viewing the station name or frequency in the front panel display	62
Control for HDMI/External Audio Device	63
Using the Control for HDMI Function for “BRAVIA” Sync	63
Preparing the Control for HDMI function	63
Using the Theater Mode	64
Watching a DVD by a single button press	64
Turning the system off in sync with the TV	64
Enjoying TV sound from the speakers by this system	64
Setting the Maximum Volume Level of the System	65
Changing the language for the on-screen display of the TV	65
Using the DIGITAL MEDIA PORT Adapter	65
Playing the connected component on the system	65
Using an S-AIR Product	66
Establishing sound transmission between the unit and S-AIR sub unit (ID setting)	67
Enjoying the system’s sound in another room	67
Enjoying the S-AIR receiver while the unit is in standby mode	68
Identifying the unit with a specific S-AIR sub unit (Pairing operation)	69
If sound transmission is unstable	70
Changing the RF output power	70
Other Operations	71
Getting Optimal Surround Sound for a Room	71
Calibrating the Appropriate Settings Automatically	72
Controlling the TV with the Supplied Remote	73
Using the Sound Effect	74
Reinforcing bass frequencies	74
Enjoying the sound at low volume	74
Enhancing compressed sound	74
Selecting the Effect to Suit the Source	75
Enjoying Multiplex Broadcast Sound	75
Changing the Input Level of the Sound from Connected Components	76
Using the Sleep Timer	76
Changing the Brightness of the Front Panel Display	77
Viewing Information About the Disc	77
Viewing the playing time and remaining time in the front panel display	77
Viewing the playing time and remaining time on the TV screen	78
Checking the play information of the disc	78
Checking the date information of a JPEG image file	79
Returning to the Default Settings	79
Returning the system parameters, such as preset stations, to the default settings	79
Returning the [SETUP] settings to the default	79
Additional Information	81
Precautions	81
Notes about the Discs	82
Troubleshooting	83
Self-diagnosis Function	89
Specifications	90
Glossary	92
Playback priority of file types	94
Language Code List	95
Parental Control Area Code List	95
Index to Parts and Control	96
Front panel	96
Rear panel	97
Front panel display	98
Remote control	99
Guide to the Control Menu Display	100
Control Menu display	100

Match case Limit results 1 per page

Press

to select the desired setting.

• “PARTY”

: The S-AIR receiver outputs

sound according to functions set on the

unit.

• “SEPARATE”: You can set the desired

function for the S-AIR receiver while unit

functions do not change.

Press

The setting is made.

Press SYSTEM MENU.

The system menu turns off.

Select the desired function on the

S-AIR receiver.

When “PARTY” is set

The

S-AIR receiver’s

function changes

sequentially as you press FUNCTION +/–

of the main unit (page 32) or S-AIR CH of

the S-AIR receiver.

When “SEPARATE” is set

The

S-AIR receiver’s

function changes

by pressing S-AIR CH of the S-AIR

receiver as follows.

“MAIN UNIT”

“TUNER FM”

“TUNER AM”

“DMPORT”

“AUDIO”

…

To enjoy the same function as the unit,

select “MAIN UNIT.”

When “TUNER FM” or “TUNER AM” is

selected on the unit, you can only select the

same band for the tuner on the S-AIR

receiver. In this case, when you select other

than “TUNER FM” or “TUNER AM” on

the unit, you can select any band for the

tuner on the S-AIR receiver.

Adjust the volume on the S-AIR

receiver.

Note

• When the sound is other than 2 channel stereo, multi-

channel sound is downmixed to 2 channel.

To set “S-AIR MODE” via the

remote

Press S-AIR MODE.

The S-AIR mode appears in the front panel

display. Each time you press S-AIR MODE, the

S-AIR mode changes.

To control the system from the

S-AIR receiver

You can control the system from the S-AIR

receiver by using the following buttons.

For details, refer to the operating instructions of

the S-AIR receiver.

You can enjoy the S-AIR receiver while the unit

is in standby mode by setting “S-AIR STBY” to

“STBY ON.”

Press SYSTEM MENU.

Press

repeatedly until “S-AIR

STBY” appears in the front panel

display, then press

Press

to select the desired setting.

• “STBY ON”: You can enjoy the S-AIR

receiver while the unit is in standby mode

or turned on. The power consumption

during the standby mode increases.

• “STBY OFF”: You cannot enjoy the

S-AIR receiver while the unit is in

standby mode.

The default setting differs depending on the

area.

Press

The setting is made.

Press SYSTEM MENU.

The system menu turns off.

Press

Operation

Share the same operations on the

remote and unit.

S-AIR CH

Change the function of the system.

Enjoying the S-AIR receiver

while the unit is in standby

mode

For the S-AIR receiver