Sony DAV-HDX587WC Operating Instructions - Page 70
If sound transmission is unstable, Changing the RF output power, Only when using the EZW-RT10A
UPC - 027242753471
View all Sony DAV-HDX587WC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
When sound transmission is established, "PAIRING" and "COMPLETE" appear alternately in the front panel display. x For the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. When sound transmission is established, "PAIRING" and "COMPLETE" appear alternately in the front panel display. Note • Perform pairing within several minutes of Step 5. If you do not, "PAIRING" and "INCOMPLETE" appear alternately in the front panel display. To continue pairing, press and start again from Step 5. To cancel pairing, press SYSTEM MENU. 7 Press SYSTEM MENU. The system menu turns off. Note • After you have performed pairing, if you select "S-AIR ID" (page 69), the ID setting ("A," "B," or "C") that you last used is displayed first by default. To cancel pairing Perform the ID setting of the unit according to the procedure of "To set the ID of the unit." If you select a new ID, pairing is canceled. If sound transmission is unstable For the surround amplifier For the S-AIR receiver If you use multiple wireless systems which share the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following "RF CHANGE" setting. 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "RF CHANGE" appears in the front panel display, then press or c. 3 Press X/x to select the desired setting. • "AUTO": Normally select this. The system changes "RF CHANGE" to "ON" or "OFF" automatically. 70US • "ON": The system transmits sound by searching for the better channel for transmitting. • "OFF": The system transmits sound by fixing the channel for transmitting. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off. 6 When you set "RF CHANGE" to "OFF," select the ID so that sound transmission is most stable (page 67). Note • In most cases, you will not need to change this setting. - If "RF CHANGE" is set to "OFF," transmission between the unit and S-AIR sub unit can be performed using one of the following channels. - S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1 - S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6 - S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). Changing the RF output power (Only when using the EZW-RT10A wireless transceiver.) 1 Press SYSTEM MENU. 2 Press X/x repeatedly until "RF POWER" appears in the front panel display, then press or c. 3 Press X/x to select the desired setting. • "HIGH": Normally select this. • "LOW": The RF output power is decreased. 4 Press . The setting is made. 5 Press SYSTEM MENU. The system menu turns off.