Sony DCR-PC115 Operating Instructions - Page 73

Dubbing only desired scenes - Digital program editing (on tapes) (4) Confirming the VCR operation 1 Insert a recordable tape into the VCR, then set to recording pause. 2 Select and decide upon IR TEST with the control button. 3 Select and decide upon EXECUTE with the control button. If the VCR starts recording, the setting is correct. When recording is finished, the indicator changes to COMPLETE. 2 V I DEO ED I T 0:08:55:06 ED I T / SET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " ENGAGE I R SETUP RECCPAUSE P AUS EMODE I R TEST RETURN RETURN EXECUTE [ MENU ] : END 3 V I DEO ED I T 0:08:55:06 ED I T / SET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " I R SETUP P AUS EMODE I R T E S T COMP L E T E RETURN [ MENU ] : END When the VCR does not operate correctly •After checking the code in "About the IR SETUP code", set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your VCR. Editing 73