Sony DCR-TRV22 Operating Instructions (primary manual) - Page 111

"Memory Stick" Operations (DCR-TRV22/TRV33 only) Selecting image quality and size Selecting the still image size (DCR-TRV33 only) You can select image size 1152 × 864 or 640 × 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 × 480.) The default setting is 1152 × 864. The POWER switch should be set to . Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select STILL SET in , then press EXEC (p. 179). (4) Select IMAGESIZE, then press EXEC. (5) Select a desired image size, then press EXEC. The indicator changes as follows: 1152 640 3 MEM SET 1 EXIT STILL SET BURST OFF QUALITY IMAGESIZE r R EXEC RET. 4 MEM SET 1 STILL SET BURST QUALITY IMAGESIZE 1152 EXIT 1152 × 864 640 × 480 REMAIN 12 r R EXEC RET. Memory capacity of still images Recorded images are compressed in JPEG format before being stored in memory. The memory capacity of still images varies depending on the selected image quality mode and image size. Details are shown in the table below. 1152 × 864 image size (DCR-TRV33 only) Image quality Memory capacity FINE About 500 KB STANDARD About 200 KB 640 × 480 image size Image quality FINE STANDARD Memory capacity About 150 KB About 60 KB 111