Sony DCR-TRV22 Operating Instructions (primary manual) - Page 97
Audio dubbing - accessory
View all Sony DCR-TRV22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Editing Audio dubbing You can record additional audio to the original sound on the tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to your tape already recorded in the 12-bit mode by specifying starting and ending points. The original sound will not be erased. Preparing for audio dubbing You can record additional audio in the following: • Dubbing with the built-in microphone • Connecting the microphone (optional) to the MIC jack • Connecting the microphone (optional) to the intelligent accessory shoe • Connecting the A/V connecting cable to the AUDIO/VIDEO jack (DCR-TRV22/ TRV33 only) The audio input to be recorded will take precedence over others in the following order: • MIC jack • Intelligent accessory shoe • AUDIO/VIDEO jack (DCR-TRV22/TRV33 only) • Built-in microphone Dubbing with the built-in microphone No connection is necessary. (If no external microphone is connected, audio recording will be performed automatically by the built-in microphone.) Connecting the microphone (optional) to the MIC jack Microphone (optional) MIC (PLUG IN POWER) : Signal flow You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a TV. The recorded sound is not output from the speaker. Check the sound by using the headphones or TV. 97