Sony DSC-S40 Operating Instructions (Camera) - Page 85
On the batteries, Nickel Primary Battery not supplied
View all Sony DSC-S40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
On the batteries Batteries you can use with your camera R6 (size AA) alkaline batteries (2) HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2) • NH-AA-DA (2) (not supplied) • NH-AA-2DB twin pack (not supplied), etc. ZR6 (size AA) Oxy Nickel Primary Battery (2) (not supplied) Batteries you cannot use with your camera Manganese batteries Lithium batteries Ni-Cd batteries If you use the above batteries, we cannot guarantee full performance of the camera by property of the batteries, such as brownout of the batteries. On alkaline batteries (supplied)/Oxy Nickel Primary Battery (not supplied) • Alkaline batteries/Oxy Nickel Primary Battery have a shorter life compared to the Nickel-Metal Hydride batteries. For this reason, the power may turn off even though the battery remaining indicator shows sufficient battery life remaining. • Battery performance differs greatly depending on the manufacturer and the type of battery, and in some cases the battery life may be extremely short. This is especially true at low temperatures, and you may not be able to shoot at temperatures below 5°C (41°F). • Do not mix new and old batteries. • The battery remaining indicator may not display the correct information when using alkaline batteries/Oxy Nickel Primary Battery. • Due to characteristics of alkaline batteries/Oxy Nickel Primary Battery, there is a large difference between the available shooting time and the available playback time. For this reason, the camera may turn off with the lens portion extended when you switch the mode switch. In this case, replace the batteries with new ones. Using the Nickel-Metal Hydride batteries allows you to shoot for longer periods of time. On Nickel-Metal Hydride batteries (not supplied) • Do not peel off the external seals or damage the batteries. Never use batteries from which the seals have been partially or completely removed, or batteries that have been split in any way. These may cause leakage, explosion, or heat-up of the battery, and personal scald or injury may be caused. These may cause a malfunction of the battery charger. • Do not carry or store the Nickel-Metal Hydride batteries with metallic objects. Since metallic objects may short the + and - ends, resulting in the risk of heating or fire. • If the poles of the Nickel-Metal Hydride batteries are dirty, the batteries may not charge properly. Wipe them with a dry cloth, etc. • At the time of purchase, or when the NickelMetal Hydride batteries have not been used for a long time, they may not full charge. This is typical of this type of battery, and is not a malfunction. If this happens, repeatedly using up the batteries fully, and then recharging them should correct the problem. • If you recharge Nickel-Metal Hydride batteries before fully using up the existing charge, the low battery warning may be displayed sooner than expected. This is called the "memory effect."* If this problem occurs, charging the batteries only after using up the existing charge will correct it. * The "memory effect" - the situation in which the capacity of the battery is temporarily lowered. • To use up the batteries completely, put the camera in the slide show mode (page 36) and leave it that way until the batteries are used up. • Do not mix new and used batteries. • Do not expose the battery to water. The battery is not water-resistant. Others 85